S6010DS2TP

Overview

The S6010DS2TP is a sensitive gate Silicon Controlled Rectifier (SCR) manufactured by Littelfuse, designed for surface-mount applications in the DPAK-2 (TO-252-2) package. It features a rated repetitive off-state voltage (VDRM) of 600 V and an on-state RMS current (It RMS) of 10 A. The device exhibits a low gate trigger current (Igt) of 200 uA and a gate trigger voltage (Vgt) of 800 mV, facilitating easy drive circuitry. Key electrical parameters include a maximum holding current (Ih) of 6 mA, a forward voltage (Vf) of 1.6 V, and a non-repetitive peak on-state current of 100 A. It operates within a temperature range of -40 C to +110 C.

Feature Summary

• Sensitive gate architecture enabling reliable triggering with minimal gate current requirements.
• Surface-mount DPAK-2 packaging optimized for automated assembly and compact board layouts.
• Robust thermal and electrical performance suitable for high-current switching environments.

Applications

• Lighting control systems requiring precise phase-angle firing.
• Solid-state relays for industrial load switching.
• Motor speed control circuits for AC appliances.

Procurement Notes

Verify component authenticity through authorized Littelfuse distributors or certified suppliers. Request original datasheets and test reports to confirm compliance with RoHS and REACH standards. Inspect packages for physical damage upon receipt. Ensure storage conditions maintain moisture sensitivity levels prior to soldering. Cross-reference ordering suffixes to confirm exact pinout and packaging specifications.

Selection Notes

Select this SCR for designs requiring a 600 V blocking capability with a 10 A continuous current rating. The sensitive gate characteristic simplifies driver design compared to standard gates. Verify that the PCB layout accommodates the DPAK-2 footprint and provides adequate copper area for heat dissipation. Consider the 100 A surge capacity for transient protection needs. Evaluate thermal resistance characteristics against the application's ambient temperature constraints.

Part Context

This component belongs to the Sxx10xSx series of thyristors from Littelfuse. The series offers various voltage and current ratings in standardized packages. The S6010DS2TP specifically addresses the need for high-current surface-mount SCR solutions. It complements other Littelfuse power control devices for integrated system designs.

Replacement Considerations

Direct replacements must match the 600 V, 10 A rating and DPAK-2 package. Verify gate sensitivity parameters to ensure compatibility with existing drive circuits. Check if alternative manufacturers offer equivalent sensitive gate SCRs with identical pinouts and thermal profiles.

FAQ

What is the maximum gate peak reverse voltage for the S6010DS2TP?

The maximum gate peak reverse voltage is specified as 6 V.

Does the S6010DS2TP support through-hole mounting?

No, the S6010DS2TP is designed for surface-mount installation in a DPAK-2 (TO-252-2) package.

What is the leakage current when the device is in the off-state?

The off-state leakage current at VDRM is typically 5 uA.