24M8PI/XT224-10/20

Crystals Overview

The YIC 24M8PI/XT224-10/20 is a surface-mount quartz crystal operating at a fundamental frequency of 24 MHz. It features a 4-SMD, no-lead package with dimensions of 2.50mm x 2.00mm and a maximum height of 0.60mm. The component offers a frequency tolerance of ±10ppm and stability of ±20ppm, with a load capacitance of 8pF. It operates within a temperature range of -40°C to +85°C and has an equivalent series resistance (ESR) of 150 Ohms.

Crystals Feature Summary

• Fundamental mode operation for reliable oscillation
• Wide industrial temperature range support
• Compact 2.5x2.0mm SMD footprint

Crystals Applications

• Microcontroller clock generation
• Communication interface timing
• Industrial control systems

Crystals Procurement Notes

Verify the specific load capacitance requirement against the host circuit design, as this unit specifies 8pF. Confirm that the ESR value aligns with the oscillator circuit's drive level constraints to prevent over-driving or failure to start. Ensure the physical dimensions fit the designated PCB land pattern without clearance issues.

Crystals Selection Notes

Select this component when a small form factor is required alongside standard industrial temperature ratings. The 24MHz frequency is common for system clocks. Consider the 150 Ohm ESR when designing the oscillator circuit; lower ESR values may be needed for circuits with higher impedance requirements or strict phase noise specifications.

Crystals Part Context

This part belongs to the YIC XT224 series, which utilizes a 2.5x2.0mm SMD package. It is distinct from the XT214 series, which uses a smaller 2.0x1.6mm footprint. The XT224 series provides a balance between size and thermal/mechanical robustness for general-purpose applications.

Crystals Replacement Considerations

Direct substitutes must match the 24MHz frequency, 8pF load capacitance, and 2.5x2.0mm package. Verify ESR compatibility with the existing oscillator circuit. Check if alternative manufacturers offer components with identical pinout and electrical characteristics.