ADC1210S080HN/C1:5

Analog To Digital Converters (ADC) Overview

The ADC1210S080HN/C1 is a single-channel, 12-bit Analog-to-Digital Converter (ADC) from NXP Semiconductors. It utilizes a pipelined architecture to achieve sample rates up to 80 Msps with low power consumption of 430 mW at this speed. The device operates on a single 3 V analog supply and supports flexible digital output logic levels ranging from 1.8 V to 3.3 V via a separate digital supply. Key performance metrics include a Signal-to-Noise Ratio (SNR) of approximately 69.5 dBFS and a Spurious-Free Dynamic Range (SFDR) of 85 dBc. It features an integrated Serial Peripheral Interface (SPI) for configuration and programmable full-scale input voltage ranges.

Analog To Digital Converters (ADC) Feature Summary

• 12-bit resolution with a maximum sampling rate of 80 Msps
• Single 3 V analog supply operation with 1.8 V to 3.3 V digital output compatibility
• Supports both CMOS and Low Voltage Differential Signalling (LVDS) Double Data Rate (DDR) outputs
• Integrated SPI interface for control and programmable full-scale input range (1 V to 2 V peak-to-peak)
• Duty cycle stabilizer and clock input divided by 2 for reduced jitter

Analog To Digital Converters (ADC) Applications

• Wireless and wired broadband communications
• Imaging systems
• Ultrasound equipment
• Software defined radio
• Portable instrumentation

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix HN/C1 corresponds to the HVQFN40 package (SOT618-1) as listed in the ordering information table. Confirm that the required sampling rate aligns with the 80 Msps specification for this variant rather than the 65, 105, or 125 Msps options within the same series. Ensure the application environment stays within the specified ambient temperature range of -40 °C to +85 °C.

Analog To Digital Converters (ADC) Selection Notes

Select this component when a 12-bit resolution and 80 Msps throughput are required. Consider the LVDS DDR output option if signal integrity over long traces is critical; otherwise, CMOS mode offers simpler interfacing. Verify that the system can provide a stable 3 V analog supply and a separate digital supply between 1.65 V and 3.6 V. Check if the 600 MHz input bandwidth exceeds the needs of the target application frequency.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC1210S series, which includes variants with different maximum sampling rates: ADC1210S065 (65 Msps), ADC1210S105 (105 Msps), and ADC1210S125 (125 Msps). All variants share the same HVQFN40 package and pinout. The series is designed to be pin-compatible with the ADC1410S (14-bit) and ADC1010S (10-bit) series, facilitating design upgrades or downgrades without PCB layout changes.

Analog To Digital Converters (ADC) Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.