BC182L_D75Z

Single Bipolar Transistors Overview

The BC182L_D75Z is a silicon NPN general-purpose bipolar junction transistor manufactured by onsemi. It features a maximum collector current of 100 mA and a collector-emitter voltage rating of 50 V. The device operates within a temperature range of -55°C to +150°C and has a power dissipation capacity of 350 mW. Key electrical parameters include a transition frequency of 150 MHz, a collector-base voltage of 60 V, and an emitter-base voltage of 6 V. The minimum DC current gain (hFE) is specified at 80 under standard test conditions.

Single Bipolar Transistors Feature Summary

• NPN silicon construction for general-purpose amplification
• Through-hole TO-92-3 package with kinked leads
• High thermal stability up to 150°C junction temperature

Single Bipolar Transistors Applications

• General purpose signal amplification
• Switching applications in low-power circuits
• Audio pre-amplifier stages

Single Bipolar Transistors Procurement Notes

Verify the specific suffix D75Z against official onsemi documentation to confirm packaging details, as suffixes may indicate specific tape-and-reel or ammo pack configurations. Confirm end-of-life status with the manufacturer before finalizing design-in decisions due to potential supply constraints.

Single Bipolar Transistors Selection Notes

Select this component for designs requiring a standard NPN transistor with moderate voltage ratings and through-hole compatibility. Ensure the application current remains below the 100 mA limit and that the operating environment stays within the specified thermal range. Compare hFE requirements against the minimum specification of 80.

Single Bipolar Transistors Part Context

This part belongs to the BC182 series of small-signal transistors. The BC182 family is widely recognized for its reliability in consumer electronics and industrial control applications. The D75Z suffix typically denotes specific packaging or ordering information defined by onsemi.

Single Bipolar Transistors Replacement Considerations

BC182LA

Single Bipolar Transistors FAQ

What is the maximum collector-emitter voltage for the BC182L_D75Z?

The maximum collector-emitter voltage (VCEO) is 50 V.

Is the BC182L_D75Z suitable for high-frequency applications?

It has a transition frequency (fT) of 150 MHz, making it suitable for general-purpose amplification but not for very high-frequency RF applications.

What is the minimum DC current gain (hFE) specified for this transistor?

The minimum DC current gain (hFE) is 80, measured at VCE = 5.0 V and IC = 100 mA.