2SC19530S

Description：TRANS NPN 150V 0.05A TO-126B-A1
Series：-

SKU:3f140e7150e4 Category: Single Bipolar Transistors Brand: Panasonic Electronic Components

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

2SC19530S is listed in the Single Bipolar Transistors range at ChipApex. The manufacturer field lists Panasonic Electronic Components. Its product description is TRANS NPN 150V 0.05A TO-126B-A1. Review the specifications below when checking this part for your BOM.

Single Bipolar Transistors specifications for 2SC19530S

Description：TRANS NPN 150V 0.05A TO-126B-A1
Series：-
Mfr：Panasonic Electronic Components
Package：Bulk
Transistor Type：NPN
Current - Collector (Ic) (Max)：50 mA
Voltage - Collector Emitter Breakdown (Max)：150 V
Vce Saturation (Max) @ Ib, Ic：1V @ 3mA, 30mA
Current - Collector Cutoff (Max)：-
DC Current Gain (hFE) (Min) @ Ic, Vce：130 @ 10mA, 5V
Power - Max：1 W
Frequency - Transition：70MHz
Operating Temperature：150°C (TJ)
Mounting Type：Through Hole
Package / Case：TO-225AA, TO-126-3
Supplier Device Package：TO-126B-A1
Grade：-
Qualification：-

Single Bipolar Transistors datasheet and documents for 2SC19530S

2SC19530S

Single Bipolar Transistors Overview

The Panasonic 2SC1953 is a silicon NPN epitaxial planar power transistor designed for audio system pre-drive applications. It features a collector-emitter voltage of 150 V and a collector current rating of 50 mA. The device operates with a collector power dissipation of 1 W at 25°C ambient temperature, extending to a junction temperature of 150°C. It exhibits a transition frequency of 70 MHz and a low collector output capacitance of 3 pF. Packaged in a TO-126B-A1 housing, it serves as the complementary pair to the 2SA0914 PNP transistor.

Single Bipolar Transistors Feature Summary

High collector-emitter voltage capability suitable for amplifier stages
Small collector output capacitance for high-frequency performance
Complementary pairing with 2SA0914 for optimized pre-driver circuits
TO-126B package design eliminating the need for insulation plates

Single Bipolar Transistors Applications

Pre-driver stage for 60 W to 100 W audio amplifiers
Audio system signal processing
General electronic equipment

Single Bipolar Transistors Procurement Notes

Verify component authenticity by cross-referencing the manufacturer marking against official datasheet specifications. Confirm the package type matches the TO-126B-A1 standard. Check for any maintenance or discontinuation notices on the manufacturer's website prior to procurement. Ensure storage conditions comply with damp-proof packing requirements if applicable.

Single Bipolar Transistors Selection Notes

Select this component when designing audio pre-driver stages requiring a 150 V NPN transistor with low output capacitance. It is specifically intended for use as a complementary pair with the 2SA0914 PNP transistor. Consider the 1 W power dissipation limit and ensure adequate thermal management for the TO-126B package during operation.

Single Bipolar Transistors Part Context

This part belongs to the category of silicon NPN epitaxial planar transistors manufactured by Panasonic Electronic Components. It is engineered for general-purpose audio applications and complements the 2SA0914 series. The TO-126B package allows for direct heat sink mounting without additional insulation hardware.

Single Bipolar Transistors Replacement Considerations

The 2SA0914 is documented as the complementary PNP pair for this NPN transistor. Verify pinout compatibility and electrical characteristics before substituting with other NPN transistors from different manufacturers.