7X-12.000MDA-T

Oscillators Overview

The TXC CORPORATION 7X-12.000MDA-T is a standard CMOS quartz oscillator operating at 12 MHz. It features a frequency stability of ±25 ppm across the -10°C to +70°C temperature range and supports a supply voltage of 1.8V. The device includes an enable/disable function and is housed in a compact 4-SMD, No Lead package with dimensions of 3.20mm x 2.50mm x 1.10mm maximum height.

Oscillators Feature Summary

• Integrated enable and disable control functionality for power management
• Compact surface-mount design suitable for space-constrained applications
• CMOS output format compatible with digital logic circuits

Oscillators Applications

• Embedded systems requiring precise timing references
• Portable electronic devices utilizing low-voltage operation
• Communication modules needing stable clock signals

Oscillators Procurement Notes

Verify the specific suffix 'MDA' against official datasheets to confirm the 1.8V supply voltage and ±25ppm stability parameters. Ensure the ordering part number matches the required enable/disable feature and package type before procurement to avoid compatibility issues with target circuit designs.

Oscillators Selection Notes

Select this component when a 12 MHz clock signal is required with low voltage operation at 1.8V. Consider the ±25ppm stability specification for applications demanding tighter tolerance than standard oscillators. The enable/disable pin allows for dynamic power control, making it suitable for battery-operated equipment.

Oscillators Part Context

This model belongs to the 7X series of standard oscillators from TXC Corporation. The series offers various frequency options and stability grades in a small form factor. The 7X-12.000MDA-T specifically targets applications requiring 1.8V operation with moderate stability requirements.

Oscillators Replacement Considerations

The 7X-12.000MBB-T is listed as an upgrade alternative by distributors, though it typically specifies 3.3V operation and ±50ppm stability. Verify voltage compatibility and stability requirements before substitution.