ADC1213D065HN-C1

Analog To Digital Converters (ADC) Overview

The ADC1213D065HN-C1 is a dual-channel, 12-bit Analog-to-Digital Converter (ADC) from the ADC1213D series, manufactured by Integrated Device Technology (IDT). It operates at a maximum sampling rate of 65 Msps and features a pipelined architecture with output error correction to ensure zero missing codes. The device supports flexible input voltage ranges from 1 V to 2 V peak-to-peak and includes an integrated Serial Peripheral Interface (SPI) for configuration. Digital outputs comply with the JESD204A standard via two differential serial lanes. It is powered by a 3 V analog supply and a 1.8 V digital supply, housed in an HVQFN56 package.

Analog To Digital Converters (ADC) Feature Summary

• Dual 12-bit ADC cores with a maximum sampling frequency of 65 Msps
• Serial data outputs compliant with the JESD204A transmission standard
• Integrated SPI for register programming and full-scale adjustment
• Flexible analog input range configurable between 1 V(p-p) and 2 V(p-p)
• Supports LVPECL or single-ended LVCMOS clock inputs with duty cycle stabilization

Analog To Digital Converters (ADC) Applications

• Wireless and wired broadband communications systems
• Portable instrumentation and spectral analysis equipment
• Imaging systems and ultrasound medical equipment
• Software-defined radio (SDR) applications

Analog To Digital Converters (ADC) Procurement Notes

Verify the manufacturer designation as Integrated Device Technology (IDT), which was acquired by Renesas Electronics. Confirm the specific suffix -C1 indicates the commercial temperature grade (-40°C to +85°C) and the HVQFN56 package type. Ensure compatibility with JESD204A receivers and check for updated datasheets reflecting any post-acquisition documentation changes.

Analog To Digital Converters (ADC) Selection Notes

Select this model for applications requiring dual-channel conversion at up to 65 Msps. Compare against ADC1213D080, ADC1213D105, and ADC1213D125 variants if higher sampling rates are needed. Ensure the system design accommodates the 3 V analog and 1.8 V digital power supplies. Verify that the host receiver supports the JESD204A protocol and can handle the required data lane speeds.

Analog To Digital Converters (ADC) Part Context

This component belongs to the ADC1213D series, which includes variants with sampling rates of 80 Msps, 105 Msps, and 125 Msps. The series shares pin compatibility with the ADC1613D, ADC1413D, and ADC1113D125 families. The device utilizes a thermal-enhanced very thin quad flat package without leads (HVQFN56) to facilitate efficient heat dissipation in high-density designs.

Analog To Digital Converters (ADC) Replacement Considerations

Pin-compatible alternatives within the same family include ADC1213D080HN-C1, ADC1213D105HN-C1, and ADC1213D125HN-C1 for higher speed requirements. Cross-family compatible parts include ADC1413D and ADC1613D series devices, though resolution differences must be considered.