FODM3023R2

$0.40

Description：OPTOISOLTR 3.75KV TRIAC 1CH 4SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:548a727e066e Category: Triac, SCR Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

FODM3023R2 is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 3.75KV TRIAC 1CH 4SMD. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for FODM3023R2

Description：OPTOISOLTR 3.75KV TRIAC 1CH 4SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：3750Vrms
Voltage - Off State：400 V
Static dV/dt (Min)：10V/µs (Typ)
Current - LED Trigger (Ift) (Max)：5mA
Current - On State (It (RMS)) (Max)：70 mA
Current - Hold (Ih)：300µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：4-SMD, Gull Wing
Supplier Device Package：4-SMD
Approval Agency：BSI, CSA, UL

Triac, SCR Output Optoisolators datasheet and documents for FODM3023R2

FODM3023R2

Triac, SCR Output Optoisolators Overview

The FODM3023R2 is a Triac and SCR output optocoupler manufactured by onsemi. It features a single channel with a phototriac output type, designed for non-zero-crossing applications. The device provides an isolation voltage of 3750 Vrms and supports a maximum continuous output current of 70 mA. Key electrical parameters include a peak repetitive off-state voltage (Vdrm) of 400 V, a maximum forward current (If) of 60 mA, and a forward voltage (Vf) of 1.2 V. Power dissipation is rated at 300 mW.

Triac, SCR Output Optoisolators Feature Summary

Random phase triac driver output suitable for AC power control
High isolation voltage capability for safety compliance
Compact surface mount Miniflat package design

Triac, SCR Output Optoisolators Applications

Solid state relay drivers
AC motor speed control circuits
Lighting dimmer applications

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific suffix R2 against official datasheets to confirm packaging details and lead times. Check for end-of-life status or obsolescence notices from onsemi before finalizing procurement plans. Ensure compatibility with existing PCB footprints for the Miniflat package.

Triac, SCR Output Optoisolators Selection Notes

Select this component when random phase triggering is required rather than zero-crossing switching. Consider the 400 V blocking voltage and 70 mA RMS current limits relative to the load requirements. Evaluate the 3750 Vrms isolation rating against system safety standards.

Triac, SCR Output Optoisolators Part Context

This part belongs to the FODM302X series of Triac output optocouplers. It shares functional similarities with other devices in the family but differs in specific electrical ratings and package configurations. The series is designed for general-purpose AC power switching applications requiring galvanic isolation.