FT2232HPQ-TRAY

Controllers Overview

The FT2232HPQ-TRAY is a high-speed USB bridge integrated circuit manufactured by FTDI, featuring an integrated Type-C and Power Delivery 3.0 controller. It provides two independent channels compatible with the FT2232H dual high-speed USB to multipurpose UART/MPSSE solution. The device supports USB 2.0 High Speed (480 Mbits/Second) and Full Speed (12 Mbits/Second). Each channel includes Multi-Protocol Synchronous Serial Engines (MPSSE) for JTAG, I2C, SPI, or bit-bang protocols. It operates on a +3.3V single supply voltage with an extended industrial temperature range of -40°C to 85°C. The component is housed in a 68-pin QFN package.

Controllers Feature Summary

• Integrates a PD policy engine using a 32-bit RISC controller with dedicated RAM and ROM for USB Type-C and Power Delivery 3.0 support.
• Provides two independent channels capable of functioning as UARTs, FIFO interfaces, or MPSSE engines for synchronous serial protocols.
• Includes an internal +1.2V LDO regulator for VCORE, a power-on reset function, and an on-chip clock multiplier PLL.
• Supports configurable I/O drive strength and slew rate, along with adjustable receive buffer timeouts for optimized data transfer.

Controllers Applications

• USB bridge implementations requiring Type-C and Power Delivery negotiation capabilities.
• High-power applications utilizing USB PD and/or Type-C ports for power sourcing or sinking.
• Single-chip solutions converting USB to dual serial ports (RS232, RS422, or RS485) or Bit-Bang interfaces.
• Interfaces connecting MCU, PLD, or FPGA designs to USB via JTAG, SPI, or I2C channels.

Controllers Procurement Notes

Verify that the specific ordering suffix matches the required package variant, as the FT2232HP series is available in QFN-68, QFN-76, and LQFP-80 configurations. Confirm that the external EEPROM configuration aligns with the intended interface mode selection and USB description strings prior to deployment.

Controllers Selection Notes

Select this component when both high-speed USB bridging and native Type-C PD controller functionality are required within a single IC. Ensure the design accommodates the 68-pin QFN footprint and provides adequate thermal dissipation for the industrial temperature range. Verify compatibility with the required driver stack, such as VCP or D2XX, for the target operating system.

Controllers Part Context

The FT2232HP belongs to the FT223xHP family, which extends the classic FT2232H architecture by adding integrated USB Type-C and Power Delivery 3.0 controllers. This integration eliminates the need for separate PD management chips in designs requiring power negotiation alongside high-speed data bridging.

Controllers Replacement Considerations

The FT2233HPQ serves as a functional alternative within the same family, offering similar bridge capabilities but housed in a 76-pin QFN package rather than the 68-pin variant found in the FT2232HPQ.