HCPL-814-W0AE

$0.16

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Broadcom Limited
Package：Tube

SKU:5750ac1d1cc7 Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-814-W0AE is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISOLATOR 5KV 1CH TRANS 4-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-814-W0AE

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Broadcom Limited
Package：Tube
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：50% @ 1mA
Current Transfer Ratio (Max)：150% @ 1mA
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：4µs, 3µs
Input Type：AC, DC
Output Type：Transistor
Voltage - Output (Max)：35V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：200mV
Operating Temperature：-30°C ~ 100°C
Mounting Type：Through Hole
Package / Case：4-DIP (0.400", 10.16mm)
Supplier Device Package：4-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-814-W0AE

HCPL-814-W0AE

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-814-W0AE is a single-channel transistor output optocoupler manufactured by Broadcom Limited. It features an isolation voltage of 5000Vrms and operates within a temperature range of -30°C to 100°C. The device accepts AC or DC input types and provides a maximum output current of 50mA with a collector-emitter saturation voltage of 200mV. Typical rise and fall times are 4µs and 3µs, respectively. The component is housed in a 4-DIP package with a pin spacing of 7.62mm.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Incorporates two inverse-parallel light emitting diodes for direct AC input drive capability
Provides high electrical isolation between input and output circuits
Features low collector dark current for reliable signal detection

Transistor, Photovoltaic Output Optoisolators Applications

AC signal detection circuits
Isolation between AC lines and digital logic
Programmable logic controller inputs
AC/DC input modules

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix W0AE against official Broadcom documentation to confirm package type and compliance status. Ensure the procurement channel sources genuine components from authorized distributors. Cross-reference the manufacturer part number with internal specifications to prevent substitution errors during integration.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when direct AC input driving is required without external rectification. The wide operating temperature range supports industrial environments. Verify that the 50mA output current capacity meets load requirements. Confirm that the 4-DIP through-hole package fits the target PCB layout constraints.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the HCPL-814 series of transistor output optocouplers produced by Broadcom Limited. The series includes variants such as HCPL-814-000E and HCPL-814-300E. These devices share common architectural features including dual inverse-parallel LEDs and phototransistor outputs designed for robust isolation applications.