MAX4592ESE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4592ESE is a high-speed, precision, quad single-pole/single-throw (SPST) analog switch designed for +12V or +15V single-supply operation. It features four normally open switches with a maximum on-resistance of 16Ω at +15V and 20Ω at +12V. The device guarantees a maximum channel-to-channel resistance match of 1.5Ω and flatness of 1.5Ω over the signal range. Switching speeds are fast, with turn-on time up to 80ns and turn-off time up to 40ns. Leakage current is limited to 100pA maximum, and charge injection is capped at 5pC. It operates within a supply voltage range of 3V to 16V and supports an extended temperature range from -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Four normally open SPST analog switches optimized for single-supply applications
• Fast switching performance with low turn-on and turn-off times
• Guaranteed low on-resistance matching and flatness across channels
• Low leakage current and minimal charge injection for signal integrity

Analog Switches, Multiplexers, Demultiplexers Applications

• Test equipment signal routing
• Sample-and-hold circuits
• Disk drive control systems
• Guidance and control systems
• Audio and video communications systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'ESE' corresponds to the 16-pin Narrow SOIC package and the -40°C to +85°C industrial temperature grade. Confirm that the component status aligns with project lifecycle requirements, as older Maxim Integrated parts may have varying availability or obsolescence statuses depending on the distributor. Ensure pin compatibility with existing board layouts if replacing legacy components.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4592ESE when four normally open analog switches are required in a single package. It is suitable for designs operating primarily on +12V or +15V supplies where low on-resistance variation between channels is critical. Consider the MAX4591EUE or MAX4593ESE if normally closed or mixed NO/NC configurations are needed instead. Evaluate the package constraints against available PCB space for the 16-pin Narrow SOIC form factor.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4592ESE belongs to the MAX459x family of high-speed analog switches from Analog Devices / Maxim Integrated. This series includes the MAX4591 (four NC switches) and MAX4593 (two NO and two NC switches). These devices share similar electrical characteristics and pinouts, differing primarily in the logic state of the switch contacts. The family is designed for precision applications requiring fast switching and low distortion.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

The datasheet notes pin compatibility with DG611/DG612/DG613 and DG211/DG212/DG213. Verify electrical specifications and package dimensions before substituting these Texas Instruments equivalents.