MAX4606CSE

Description：IC SW SPST-NO/NCX4 4OHM 16SOIC
Series：-

SKU:78dd2b013780 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4606CSE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW SPST-NO/NCX4 4OHM 16SOIC. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4606CSE

Description：IC SW SPST-NO/NCX4 4OHM 16SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NO/NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：4Ohm
Channel-to-Channel Matching (ΔRon)：200mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：120ns, 130ns
-3db Bandwidth：-
Charge Injection：225pC
Channel Capacitance (CS(off), CD(off))：34pF, 34pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-60dB @ 1MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Surface Mount
Package / Case：16-SOIC (0.154", 3.90mm Width)
Supplier Device Package：16-SOIC
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4606CSE

MAX4606CSE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4606CSE is a quad SPST CMOS analog switch featuring two normally open and two normally closed channels. It operates from single supplies of +4.5V to +36V or dual supplies of ±4.5V to ±20V. The device guarantees a maximum on-resistance of 5Ω with a match between channels of 0.5Ω max and flatness of 0.5Ω max over the signal range. It handles Rail-to-Rail analog signals, offers off-leakage current of 2.5nA max at +85°C, and includes ESD protection exceeding 2000V. Control inputs are TTL/CMOS compatible.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Rail-to-Rail signal handling capability for full voltage range operation
Guaranteed low on-resistance matching and flatness across channels
TTL/CMOS-compatible digital control inputs for logic integration
High electrostatic discharge protection rating

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement in electronic systems
Audio-signal routing and switching
Automatic test equipment signal paths
PBX and PABX communication systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'C' indicates the commercial temperature range of 0°C to +70°C. Confirm the package type matches the required board layout, as this part number corresponds to the 16-pin Narrow SOIC footprint. Ensure supply voltages remain within the specified absolute maximum ratings to prevent damage.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4606CSE when a mixed configuration of two normally open and two normally closed switches is required within a single package. Compare against the MAX4604 (all NC) and MAX4605 (all NO) if channel polarity differs. Verify that the 5Ω on-resistance meets the signal integrity requirements for the specific application load.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4604/MAX4605/MAX4606 family of quad analog switches manufactured by Analog Devices Inc./Maxim Integrated. The series provides low-distortion switching solutions designed to replace mechanical relays in compact designs. The MAX4606 variant specifically combines both normally open and normally closed functions.