MAX4606EPE

Description：IC SW SPST-NO/NCX4 4OHM 16DIP
Series：-

SKU:987bc045ec55 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4606EPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW SPST-NO/NCX4 4OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4606EPE

Description：IC SW SPST-NO/NCX4 4OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NO/NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：4Ohm
Channel-to-Channel Matching (ΔRon)：200mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：120ns, 130ns
-3db Bandwidth：-
Charge Injection：225pC
Channel Capacitance (CS(off), CD(off))：34pF, 34pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-60dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4606EPE

MAX4606EPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4606EPE is a quad single-pole/single-throw (SPST) CMOS analog switch housed in a 16-pin Plastic DIP package. It integrates two normally open and two normally closed switches, featuring a maximum on-resistance of 5Ω with guaranteed matching and flatness of 0.5Ω over the signal range. The device supports single supplies from +4.5V to +36V or dual supplies from ±4.5V to ±20V. Key electrical parameters include a maximum off-leakage current of 2.5nA at +85°C, turn-on/turn-off times of 120ns/130ns under dual supply conditions, and charge injection of 225pC. It operates within a temperature range of -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Rail-to-Rail signal handling capability for full voltage swing operation
TTL/CMOS-compatible control inputs ensuring logic compatibility
Guaranteed low on-resistance matching and flatness across channels
High ESD protection exceeding 2000V per Method 3015.7

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement in electronic circuits
PBX and PABX communication systems
Automatic test equipment signal routing
Audio-signal routing applications
Avionics systems requiring reliable switching

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'EPE' confirms the -40°C to +85°C industrial temperature range and the 16-pin PDIP package configuration. Confirm RoHS compliance status as indicated by the '+' designation in the part number. Ensure the ordering quantity matches standard tube packaging requirements for this component type.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4606EPE when a mixed configuration of both normally open and normally closed switches is required within a single package. Compare against MAX4604 (all NC) or MAX4605 (all NO) if uniform switch polarity suffices. Verify that the 5Ω on-resistance meets system loss requirements and that the 36V single-supply limit accommodates the application's voltage headroom.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4604/MAX4605/MAX4606 family of 5Ω quad SPST CMOS analog switches manufactured by Analog Devices Inc./Maxim Integrated. The series provides pin-compatible alternatives with varying switch polarities to simplify board design for different signal path requirements.