RP328-130-2000-C

Power Line Filter Modules Overview

The RP328-130-2000-C is a three-phase delta single-stage power line filter from the Astrodyne TDI RP300 series. It features a chassis mount style with terminal block termination. The unit is rated for 480 VAC and 130 A at 50/60 Hz operating frequencies. Physical dimensions include a length of 240 mm and a height of 90 mm. The component complies with CSA, EN60939, and UR standards.

Power Line Filter Modules Feature Summary

• Single-stage EMC/EMI filtering architecture
• Chassis mount installation with terminal block connections
• Three-phase delta configuration

Power Line Filter Modules Applications

• General-purpose industrial power distribution
• EMC/EMI suppression in industrial machinery
• Power conditioning systems

Power Line Filter Modules Procurement Notes

Verify the specific suffix 'C' confirms terminal block termination against the official datasheet. Confirm compliance requirements such as CSA, EN60939, and UR match the target market regulations. Ensure the 130 A current rating and 480 VAC voltage rating align with the system design parameters before procurement.

Power Line Filter Modules Selection Notes

Select this model when a single-stage solution is sufficient for the required attenuation levels. The terminal block interface simplifies wiring compared to stud or wire options. Verify that the physical footprint of 240 mm by 90 mm fits the available chassis space. Ensure the thermal environment remains within the specified operating temperature range.

Power Line Filter Modules Part Context

This component belongs to the RP300 series of power line filters. The series offers various current ratings including 7A, 16A, 30A, 42A, 55A, 75A, 100A, 130A, and 180A. Termination options vary across the series, including wire, stud, and connector types, allowing for flexible integration into different power systems.

Power Line Filter Modules Replacement Considerations

Check for other RP328 variants with different termination styles if terminal blocks are unsuitable. Consider lower current ratings if the load does not require 130 A. Verify that alternative models maintain the same 480 VAC rating and single-stage topology.