SN74LVC16374ADLG4

Flip Flops Overview

The SN74LVC16374ADLG4 is a Texas Instruments logic component classified as a D-type flip-flop within the LVC series. It features sixteen edge-triggered data inputs and outputs with three-state control. The device operates on a supply voltage range of 1.65 V to 3.6 V. It supports both CMOS and TTL input compatibility. The package is a 48-pin SSOP with a maximum operating temperature of +125 °C and a minimum of -40 °C.

Flip Flops Feature Summary

• Sixteen-bit edge-triggered D-type flip-flop architecture
• Three-state output capability for bus driving applications
• Wide operating voltage range supporting 1.65 V to 3.6 V systems

Flip Flops Applications

• Parallel-to-serial data conversion circuits
• High-speed buffering and register storage
• Bus-oriented memory mapping systems

Flip Flops Procurement Notes

Verify the specific suffix 'G4' against the manufacturer's current documentation to confirm lead-free status and RoHS compliance. Confirm the active lifecycle status, as end-of-life notifications may apply to older revisions. Ensure the SSOP-48 package dimensions match the target PCB footprint requirements before finalizing procurement orders.

Flip Flops Selection Notes

Select this component when designing systems requiring sixteen bits of parallel data storage with high-speed performance. The LVC series offers low power consumption suitable for battery-operated devices. Verify that the required supply voltage falls within the 1.65 V to 3.6 V range and that the three-state outputs are necessary for shared bus architectures.

Flip Flops Part Context

This part belongs to the SN74LVC16374A family of 16-bit D-type flip-flops. It is functionally similar to other industry-standard 16-bit registers but optimized for low-voltage operation. The device provides a compact solution for managing large data buses in modern digital logic designs.

Flip Flops Replacement Considerations

Check for direct pin-compatible alternatives such as the SN74LVC16374ADLR or SN74LVC16374ADLRE4. Verify electrical specifications and package dimensions before substitution.