SXT22412ED07-16.384M

Crystals Overview

The SXT22412ED07-16.384M is a surface-mount crystal oscillator manufactured by Suntsu Electronics, Inc. It operates at a fundamental frequency of 16.384 MHz with a load capacitance of 12 pF and an equivalent series resistance of 100 Ohms. The component features a 4-SMD, No Lead package configuration. Frequency stability is rated at ±15 ppm over the operating temperature range of 0°C to +70°C.

Crystals Feature Summary

• Surface-mount design for automated assembly
• Fundamental mode operation
• Standard 12 pF load capacitance compatibility

Crystals Applications

• Microcontroller clock sources
• Digital signal processing timing references
• Communication interface synchronization

Crystals Procurement Notes

Verify the specific suffix 'ED07' against the manufacturer's current datasheet to confirm pinout and marking details. Ensure the required frequency tolerance of ±15 ppm meets system timing requirements. Confirm the operating temperature range of 0°C to +70°C is sufficient for the intended environment before finalizing procurement.

Crystals Selection Notes

Select this component when a 16.384 MHz reference is required for digital logic circuits. The 12 pF load capacitance matches standard microcontroller input specifications. The 4-SMD package offers space efficiency compared to through-hole alternatives. Verify that the 100 Ohm ESR is compatible with the oscillator circuit drive level constraints.

Crystals Part Context

This part belongs to the SXT224 series of surface-mount crystals from Suntsu Electronics. The series provides various frequencies within the same physical footprint. The model number indicates the specific frequency and package type. It serves as a passive timing element in electronic assemblies requiring precise clock generation.

Crystals Replacement Considerations

Direct substitutes must match the 16.384 MHz frequency, 12 pF load capacitance, and 4-SMD package dimensions. Check equivalent series resistance limits. Verify thermal stability ratings align with the original specification.