407F39E036M0000

Crystals Overview

The CTS-Frequency Controls 407F39E036M0000 is a surface-mount fundamental mode crystal resonator operating at a nominal frequency of 36.0000 MHz. It features a load capacitance of 20pF and an initial frequency tolerance of ±30 ppm, with a stability of ±50 ppm. The device utilizes a 4-SMD, no-lead package measuring 7.00mm x 5.00mm x 1.30mm maximum height. Designed for industrial applications, it operates within a temperature range of -20°C to +70°C and exhibits an equivalent series resistance (ESR) of 40 Ohms.

Crystals Feature Summary

• Fundamental mode operation ensures precise frequency generation for digital circuits.
• Surface-mount construction facilitates automated assembly and compact PCB layout.
• Industrial temperature rating supports reliable performance in demanding environments.

Crystals Applications

• Microcontroller clock sources
• Communication interface timing
• Industrial control systems

Crystals Procurement Notes

Verify the specific suffix 'E' against the official datasheet to confirm the exact tolerance and stability specifications required for the design. Ensure the 4-SMD footprint matches the target PCB land pattern dimensions precisely. Confirm RoHS compliance status if restricted substances are a project constraint.

Crystals Selection Notes

Select this component when a 36 MHz fundamental frequency is required with ±30 ppm initial accuracy. The 20pF load capacitance must match the oscillator circuit requirements. Consider the 40 Ohm ESR value for drive level sensitivity. The industrial temperature range suits applications exceeding standard commercial limits.

Crystals Part Context

This part belongs to the 407 series of SMD crystals from CTS-Frequency Controls. The series offers various frequencies and packages. The 407F35E036M0000 is a direct substitute with identical electrical parameters but potentially different marking or minor manufacturing revisions.

Crystals Replacement Considerations

The 407F35E036M0000 is listed as a direct replacement by the manufacturer. Verify that any marking differences do not impact system identification requirements.