ADA4302-4ACP-RL7

RF Power Dividers/Splitters Overview

The ADA4302-4ACP-RL7 is an active RF splitter manufactured by Analog Devices Inc. It operates within a frequency range of 54 MHz to 865 MHz and requires a nominal supply current of 215 mA. The device provides 4.6 dB of gain relative to the RF signal through a low noise buffer amplifier followed by four parallel amplifiers. It is housed in a 20-LFCSP package.

RF Power Dividers/Splitters Feature Summary

• Provides lossless signal splitting for RF applications
• Integrates a low noise buffer amplifier with four parallel amplifiers
• Delivers 4.6 dB gain relative to the RF signal

RF Power Dividers/Splitters Applications

• Multituner cable set-top boxes
• Cable splitter modules
• Multituner televisions
• Home gateways

RF Power Dividers/Splitters Procurement Notes

Verify the specific suffix (ACP-RL7) against the manufacturer's official documentation to confirm the exact packaging type, such as tape and reel specifications. Ensure the component matches the required operating temperature range and voltage supply parameters defined in the datasheet before integration into the design.

RF Power Dividers/Splitters Selection Notes

Select this component when a lossless signal split is required in RF systems. It is suitable for applications needing integrated buffering and amplification. Consider the 54 MHz to 865 MHz frequency range and the 215 mA supply current requirement during system power budgeting and thermal management planning.

RF Power Dividers/Splitters Part Context

This part belongs to the ADA4302 family of active RF splitters from Analog Devices Inc. These devices are designed to replace traditional passive solutions in applications requiring signal distribution without significant insertion loss. The family typically includes variants optimized for different packaging and volume requirements.

RF Power Dividers/Splitters Replacement Considerations

Check for direct substitutes within the ADA4302 series or other active splitters from Analog Devices. Verify pin compatibility and electrical performance equivalence before replacing.