ADC10040QCIMTX

$5.98

Description：IC ADC 10BIT PIPELINED 28TSSOP
Series：-

SKU:6843b8f9ba65 Category: Analog to Digital Converters (ADC) Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ADC10040QCIMTX is listed in the Analog To Digital Converters (ADC) range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC ADC 10BIT PIPELINED 28TSSOP. Review the specifications below when checking this part for your BOM.

Analog To Digital Converters (ADC) specifications for ADC10040QCIMTX

Description：IC ADC 10BIT PIPELINED 28TSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Number of Bits：10
Sampling Rate (Per Second)：40M
Number of Inputs：1
Input Type：Differential, Single Ended
Data Interface：Parallel
Configuration：S/H-ADC
Ratio - S/H:ADC：1:01
Number of A/D Converters：1
Architecture：Pipelined
Reference Type：External, Internal
Voltage - Supply, Analog：2.7V ~ 3.6V
Voltage - Supply, Digital：2.5V ~ 3.6V
Features：-
Operating Temperature：-40°C ~ 85°C
Package / Case：28-TSSOP (0.173", 4.40mm Width)
Supplier Device Package：28-TSSOP
Mounting Type：Surface Mount
Grade：-
Qualification：-

Analog To Digital Converters (ADC) datasheet and documents for ADC10040QCIMTX

ADC10040QCIMTX

Analog To Digital Converters (ADC) Overview

The ADC10040QCIMTX is a monolithic CMOS analog-to-digital converter manufactured by Texas Instruments. It provides 10-bit resolution at a sampling rate of 40 MSPS using a differential pipeline architecture with digital error correction. The device operates on a single +3.0V supply, consuming 55.5 mW in active mode and 13.5 mW in standby. Key electrical specifications include a full-power bandwidth of 400 MHz, a typical Signal-to-Noise Ratio (SNR) of 59.6 dB at an input frequency of 11 MHz, and a Spurious Free Dynamic Range (SFDR) of -80 dB. It features selectable full-scale input swings of 2.0 VP-P, 1.5 VP-P, or 1.0 VP-P via the IRS pin.

Analog To Digital Converters (ADC) Feature Summary

AEC-Q100 Grade 3 Qualified for automotive applications
Selectable full-scale input swing: 2.0 VP-P, 1.5 VP-P, or 1.0 VP-P
On-chip precision bandgap reference and sample-and-hold amplifier
User-selectable output data format: Offset Binary or Two's Complement

Analog To Digital Converters (ADC) Applications

Ultrasound and Imaging systems
Instrumentation
Cellular Base Stations/Communications Receivers
Sonar/Radar
xDSL

Analog To Digital Converters (ADC) Procurement Notes

Verify that the component meets AEC-Q100 Grade 3 qualification requirements for automotive use. Confirm the specific ordering suffix matches the required package and temperature range. Ensure the design accommodates the separate VDDA and VDDIO power supplies to maintain signal integrity.

Analog To Digital Converters (ADC) Selection Notes

Select this component for high-speed applications requiring low power consumption and moderate resolution. Ensure the system clock frequency remains between 20 MHz and 40 MHz. Verify that the input signal amplitude matches the selected IRS pin configuration to achieve full-scale conversion without clipping.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC10040 family from Texas Instruments. The 'Q' designation indicates it is qualified under the AEC-Q100 standard for automotive grade reliability. The 'C' denotes the commercial temperature range operation (-40°C to +85°C), and 'IMTX' specifies the 28-pin TSSOP package with tape and reel packaging.