ADC10D1000CIUT/NOPB

Analog To Digital Converters (ADC) Overview

The ADC10D1000CIUT/NOPB is a 10-bit dual-channel analog-to-digital converter manufactured by Texas Instruments. It operates at sampling rates up to 1.0 GSPS in dual mode or 2.0 GSPS in single-ended mode. The device features a folding interpolating architecture with differential inputs and parallel LVDS outputs. Key electrical parameters include a typical SNR of 57 dB, ENOB of 9.1 bits, DNL of +/- 0.25 LSB, and INL of 1.4 LSB. It requires a 1.9 V analog supply and 1.8 V to 2 V digital supply, consuming approximately 2.77 W. The component is housed in a 292-ball BGA package and functions within an industrial temperature range of -40°C to +85°C.

Analog To Digital Converters (ADC) Feature Summary

• Ultra-high-speed operation supporting up to 1.0 GSPS per channel or 2.0 GSPS in single-ended mode
• Folding interpolating architecture providing high dynamic performance with low power consumption
• Integrated internal tracking amplifier and programmable gain/offset adjustment capabilities
• Dual independent DDR data clocks (DCLKI and DCLKQ) for flexible interface timing

Analog To Digital Converters (ADC) Applications

• Wideband communication systems requiring high-speed signal digitization
• Digital oscilloscopes and test equipment demanding high resolution and bandwidth
• Software-defined radio (SDR) front-end modules
• High-performance data acquisition systems

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix 'NOPB' confirms lead-free status and RoHS compliance as per the manufacturer's datasheet. Confirm the 'C' grade indicates the industrial temperature range (-40°C to +85°C). Ensure the BGA-292 package footprint matches the PCB design guidelines provided in the official documentation. Check for any export control restrictions associated with this specific part number before finalizing orders.

Analog To Digital Converters (ADC) Selection Notes

Select this component when dual-channel input is required at speeds up to 1.0 GSPS. For applications needing higher speed on a single channel, utilize the DES mode for 2.0 GSPS operation. Compare against the ADC10D1500 if higher sampling rates (1.5 GSPS) are necessary. Ensure the system can support the required 1.9 V and 1.8 V-2.0 V power rails. Verify that the LVDS output interface is compatible with the downstream FPGA or processor logic levels.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC10D1000 series, which represents Texas Instruments' ultra-high-speed CMOS ADC family. It shares pin compatibility with the ADC12D1000/1600/1800 series, facilitating design upgrades. The device builds upon previous GHz-series architectures by adding features like automatic multi-chip synchronization and extended self-calibration schemes to maintain flat dynamic response across Nyquist zones.

Analog To Digital Converters (ADC) Replacement Considerations

The ADC10D1500CIUT/NOPB serves as a higher-speed alternative within the same package, offering 1.5 GSPS dual-channel operation. The ADC12D1000 series offers 12-bit resolution but may require different power management strategies. Verify pinout compatibility before substituting, as architectural differences between 10-bit and 12-bit variants may impact board layout.