ADFS7124-4BBCPZRL7

$17.50

Description：4CH 24B ADC
Series：-

SKU:71d0a69ef272 Category: Analog to Digital Converters (ADC) Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ADFS7124-4BBCPZRL7 is listed in the Analog To Digital Converters (ADC) range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is 4CH 24B ADC. Review the specifications below when checking this part for your BOM.

Analog To Digital Converters (ADC) specifications for ADFS7124-4BBCPZRL7

Description：4CH 24B ADC
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Number of Bits：24
Sampling Rate (Per Second)：19.2k
Number of Inputs：4, 8
Input Type：Differential, Pseudo-Differential, Single Ended
Data Interface：3-Wire Serial, 4-Wire Serial, DSP, MICROWIRE, QSPI, SPI
Configuration：MUX-PGA-ADC
Ratio - S/H:ADC：0:01
Number of A/D Converters：1
Architecture：Sigma-Delta
Reference Type：External, Internal
Voltage - Supply, Analog：2.7V ~ 3.6V, ±1.8V
Voltage - Supply, Digital：1.65V ~ 3.6V
Features：GPIO, Integrated PGA, Multiplexed Input, Temperature Sensor
Operating Temperature：-40°C ~ 125°C
Package / Case：32-VFQFN Exposed Pad, CSP
Supplier Device Package：32-LFCSP (5x5)
Mounting Type：Surface Mount

Analog To Digital Converters (ADC) datasheet and documents for ADFS7124-4BBCPZRL7

ADFS7124-4BBCPZRL7

Analog To Digital Converters (ADC) Overview

The Analog Devices Inc. ADFS7124-4BBCPZRL7 is a low-power, low-noise analog front-end designed for high-precision measurements. It integrates a 24-bit Sigma-Delta ADC with configurable inputs: four differential or seven single-ended/pseudo-differential channels. The device features an on-chip low-gain stage allowing direct connection of small-amplitude signals. It offers three power modes to customize current consumption, output data rate, and RMS noise. Key specifications include rail-to-rail analog input (gain >1), 50Hz/60Hz synchronous rejection at 25 SPS, and a programmable gain range of 1 to 128. It operates on a 2.7V to 3.6V supply within a -40°C to +125°C temperature range.

Analog To Digital Converters (ADC) Feature Summary

TÜV Rheinland SC3 functional safety certified (Document No. 968/FSP 2188.01/23)
Three selectable power modes balancing noise, speed, and consumption
Lowest power mode: 24nV RMS noise at 1.15 SPS with 255µA typical current
Integrated bandgap reference with max drift of 15ppm/°C

Analog To Digital Converters (ADC) Applications

Temperature measurement
Pressure measurement
Industrial process control
Instrumentation
Smart transmitters

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix BBCPZRL7 against official documentation to confirm package type, tape-and-reel configuration, and temperature grade. Ensure compatibility with system voltage requirements of 2.7V to 3.6V. Confirm functional safety certification status if required for SIL applications.

Analog To Digital Converters (ADC) Selection Notes

Select this component for applications requiring high-resolution signal acquisition with minimal power consumption. Choose the appropriate power mode based on the trade-off between RMS noise performance and output data rate needs. Verify that the 4kV ESD protection meets system robustness requirements.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADFS7124 family of analog front-ends from Analog Devices. It is specifically tailored for precision sensor interfaces in industrial environments. The device simplifies design by integrating PGA, reference, and digital filters into a single 32-pin LFCSP package.