ADG613YRU-REEL7

Analog Switches, Multiplexers, Demultiplexers Overview

The ADG613YRU-REEL7 is a monolithic CMOS device containing four independently selectable single-pole, single-throw (SPST) switches. It supports dual-supply operation from ±2.7 V to ±5.5 V and single-supply operation from +2.7 V to +5.5 V. The device features ultralow charge injection of 1 pC typically and maximum leakage currents of 100 pA at 25°C. On-resistance is specified at 85 Ω typically for dual supplies and up to 460 Ω max for single supplies at lower voltages. It operates within an automotive temperature range of −40°C to +125°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Ultralow charge injection of 1 pC typically across the full input signal range.
• Mixed digital control logic with two switches using non-inverted inputs and two using inverted inputs.
• Break-before-make switching action prevents simultaneous connection of multiple channels.
• Rail-to-rail switching capability allows analog signals to extend to the supply rails.

Analog Switches, Multiplexers, Demultiplexers Applications

• Automatic test equipment
• Data acquisition systems
• Battery-powered systems
• Communications systems
• Sample-and-hold systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify that the specific part number includes the Y suffix to confirm the extended automotive temperature range of −40°C to +125°C. Ensure the REEL7 designation matches the required tape and reel packaging format for automated assembly processes. Confirm RoHS compliance status as indicated by the Z suffix in the base model ADG613YRUZ.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the ADG613 when mixed logic levels are required, as it combines non-inverted and inverted control inputs within a single package. Compare on-resistance specifications against system requirements, noting that resistance increases significantly at lower single-supply voltages like 3 V. Consider the break-before-make timing if signal overlap between channels must be avoided during switching transitions.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the ADG611/ADG612/ADG613 family of quad SPST analog switches. While the ADG611 uses exclusively non-inverted logic and the ADG612 uses exclusively inverted logic, the ADG613 provides a hybrid configuration. All variants share similar electrical characteristics regarding leakage, bandwidth, and power consumption, differing primarily in their digital control truth tables.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Public confirmed substitutes include the ADG611YRUZ-REEL7 and ADG612YRUZ-REEL7. Note that these alternatives do not offer the mixed logic configuration of the ADG613; they require either all non-inverted or all inverted control signals respectively. Verify pin compatibility and logic state requirements before substitution.

Analog Switches, Multiplexers, Demultiplexers FAQ

How does the digital control logic differ between the switches in the ADG613?

The ADG613 contains two switches with non-inverted logic (turning on with a logic high) and two switches with inverted logic (turning on with a logic low). Specifically, Switches 1 and 4 follow the non-inverted logic, while Switches 2 and 3 follow the inverted logic.

What is the typical power consumption of this device?

The typical power consumption is less than 0.1 μW, making it suitable for battery-powered applications where minimal quiescent current is critical.

Does the ADG613 support rail-to-rail operation?

Yes, each switch conducts equally well in both directions when on, and the input signal range extends to the supplies, allowing for true rail-to-rail switching operation.