ASE24X24X10NK

Overview

The ASE24X24X10NK is a steel electrical enclosure manufactured by Hoffman Enclosures, Inc. It features dimensions of 24 inches in width, 24 inches in height, and 10 inches in depth. The unit is constructed with a 14-gauge body and a 16-gauge cover. It provides NEMA Type 1 and IP30 protection ratings. The enclosure utilizes a solid, screw-on cover design without flanges. The exterior finish is a gray polyester powder paint. This component is classified as a junction box suitable for indoor applications.

Feature Summary

• Solid screw-on cover construction
• NEMA Type 1 and IP30 protection rating
• Gray polyester powder painted finish

Applications

• Indoor junction box installations
• Electrical equipment housing
• Control panel enclosures

Procurement Notes

Verify the specific gauge requirements for both the body and cover to ensure compatibility with mechanical load expectations. Confirm that the NEMA Type 1 rating aligns with the environmental conditions of the intended installation site. Ensure the manufacturer part number matches exactly to avoid confusion with similar models in the series.

Selection Notes

Select this model when an indoor environment requires basic dust protection and drip resistance. The 14-gauge body offers structural rigidity for standard mounting hardware. The 10-inch depth provides adequate space for typical wiring and component arrangement. Verify that the solid cover design meets security and access requirements for the specific application area.

Part Context

This model belongs to the Hoffman A90P1 series of steel enclosures. These units are designed for general-purpose indoor use where weatherproofing is not required. The series emphasizes durability through powder-coated steel construction. Similar models in the lineup vary primarily in internal volume and door configuration options.

Replacement Considerations

Direct substitutes may include other Hoffman models within the same dimensional family. Verify that any replacement maintains the 14-gauge body thickness and 16-gauge cover specification. Ensure the replacement unit retains the screw-on cover mechanism if tool-based access is preferred.