CA3260EZ

Description：IC CMOS 2 CIRCUIT 8DIP
Series：-
Mfr：Renesas Electronics Corporation
Package：Tube

SKU:33df75c53480 Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

CA3260EZ is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC CMOS 2 CIRCUIT 8DIP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for CA3260EZ

Description：IC CMOS 2 CIRCUIT 8DIP
Series：-
Mfr：Renesas Electronics Corporation
Package：Tube
Amplifier Type：CMOS
Number of Circuits：2
Output Type：-
Slew Rate：10V/µs
Gain Bandwidth Product：4 MHz
Current - Input Bias：2 pA
Voltage - Input Offset：6 mV
Current - Supply：9mA (x2 Channels)
Current - Output / Channel：45 mA
Voltage - Supply Span (Min)：4 V
Voltage - Supply Span (Max)：16 V
Operating Temperature：-55°C ~ 125°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-PDIP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for CA3260EZ

CA3260EZ

Instrumentation, Op Amps, Buffer Amps Overview

The CA3260EZ is a dual operational amplifier from the CA3260 series, manufactured by Renesas Electronics Corporation. It features a BiMOS architecture combining PMOS input transistors with a CMOS output stage. The device operates on supply voltages ranging from 4V to 16V (or ±2V to ±8V split). Key electrical parameters include a unity gain crossover frequency of 4 MHz and a slew rate of 10 V/µs at ±7.5V. Input characteristics include an input resistance of 1.5 TΩ and an input current of 5 pA typical at 15V operation. The package is an 8-lead PDIP.

Instrumentation, Op Amps, Buffer Amps Feature Summary

BiMOS technology integrates P-channel MOSFET inputs for high impedance and low bias current with a complementary symmetry CMOS output stage.

Instrumentation, Op Amps, Buffer Amps Applications

Ground referenced single supply amplifiers
Fast sample-hold amplifiers
High input impedance wideband amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the specific ordering suffix matches the required RoHS compliance status and lead finish specifications. Confirm the package type corresponds to the through-hole wave solder processing requirements rather than reflow soldering applications. Ensure the manufacturer designation aligns with the intended supply chain source.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high input impedance and rail-to-rail output swing are required in a dual configuration. The PMOS input stage allows common mode voltage to extend below the negative supply rail, making it suitable for single-supply designs. Consider the CA3260A variant if superior input offset voltage characteristics are necessary compared to the standard CA3260.

Instrumentation, Op Amps, Buffer Amps Part Context

The CA3260EZ belongs to the CA3260 series of dual operational amplifiers. This series is characterized by its BiMOS construction, which merges the advantages of CMOS and bipolar technologies. The 'Z' suffix typically indicates Pb-free packaging compliant with RoHS standards, while the 'E' suffix denotes the extended temperature range capability.