CLC1008IST5MTR

Overview

The CLC1008IST5MTR is a single-channel operational amplifier manufactured by MaxLinear, Inc. It features a gain-bandwidth product of 33 MHz and a slew rate of 50 V/µs. The device operates within a supply voltage range of 2.5 V to 5.5 V, drawing a typical operating current of 505 µA per channel. It provides rail-to-rail output capability and supports an output current of 15 mA. Key electrical specifications include an input offset voltage of 5 mV, an input bias current of 1.2 µA, a common-mode rejection ratio of 74 dB, and an input voltage noise density of 12 nV/√Hz.

Feature Summary

• Single-channel operational amplifier with rail-to-rail output capability
• High slew rate of 50 V/µs for fast signal response
• Low power consumption suitable for battery-operated applications
• Wide supply voltage operation range from 2.5 V to 5.5 V

Applications

• Signal conditioning in portable electronic devices
• Active filtering in audio and sensor interfaces
• Buffer stages in low-power data acquisition systems

Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels due to obsolete status. Confirm RoHS compliance documentation matches the specific revision. Request full datasheet and test reports to validate performance against original specifications before integration into design.

Selection Notes

Select this component when a single-channel op-amp with rail-to-rail output and moderate bandwidth is required. Ensure the application voltage stays within the 2.5 V to 5.5 V range. Consider the 505 µA quiescent current for power budgeting. Verify thermal requirements for the SOT-23-5 package under expected load conditions.

Part Context

This part belongs to the CLC1008 series of low-power operational amplifiers from MaxLinear. It is designed for general-purpose analog signal processing where power efficiency and output swing are critical. The series typically includes variants with different packaging options such as TDFN and SOIC, catering to diverse PCB layout constraints.

Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Consult MaxLinear technical support for validated alternatives or cross-reference with similar single-channel, rail-to-rail op-amps meeting the 33 MHz GBW and 50 V/µs slew rate specifications.