DAH13002C

Overview

The Hoffman Enclosures DAH13002C is a 1300-watt electric heater designed for enclosure thermal management. It operates on a nominal voltage of 230 VAC with a current draw of 5.7 A. The unit features an adjustable thermostat range from 0 to 100 degrees Fahrenheit (-18 to 38 degrees Celsius). Physical dimensions are 162.1 mm in length, 127 mm in width, and 166 mm in height (6.4 inches). The housing is constructed from brushed aluminum.

Feature Summary

• Thermostatically controlled operation protects equipment from low temperatures, condensation, and corrosion
• Utilizes a ball bearing fan for active air circulation within the enclosure
• Constructed from brushed aluminum material for durability

Applications

• Protection of mechanical equipment in cold environments
• Prevention of condensation in electrical enclosures
• Mitigation of corrosion risks for electronic components

Procurement Notes

Verify the specific voltage requirement against your system's supply, as this model is rated for 230 VAC. Confirm that the mounting configuration aligns with your DIN rail or panel setup. Ensure the 1300 W power dissipation matches the thermal load requirements of the target enclosure size. Check local regulations regarding electrical installation standards before deployment.

Selection Notes

Select this model when high-capacity heating is required for larger enclosures exposed to significant cold stress. The 1300 W output distinguishes it from lower-wattage alternatives suitable for smaller spaces. Consider the physical footprint of 162.1 x 127 x 166 mm during layout planning. The adjustable thermostat allows customization of activation thresholds based on specific environmental conditions.

Part Context

This component belongs to the DAH series of rack heaters manufactured by nVent Hoffman. These units are categorized under rack accessories and enclosure thermal management products. The series provides standardized solutions for maintaining internal temperatures within industrial control cabinets and similar protective housings.

Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Verify compatibility with existing DIN rail mounts if replacing older models. Ensure replacement units maintain the same 230 VAC rating and 1300 W capacity to avoid thermal performance deficits.