DG304AAK/883

Description：IC SW SPST-NOX2 50OHM 14CERDIP
Series：-

SKU:4afa69736403 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Vishay Siliconix

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG304AAK/883 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SW SPST-NOX2 50OHM 14CERDIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG304AAK/883

Description：IC SW SPST-NOX2 50OHM 14CERDIP
Series：-
Mfr：Vishay Siliconix
Package：Tube
Switch Circuit：SPST - NO
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：50Ohm
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±15V
Switch Time (Ton, Toff) (Max)：250ns, 150ns
-3db Bandwidth：-
Charge Injection：30pC
Channel Capacitance (CS(off), CD(off))：14pF, 14pF
Current - Leakage (IS(off)) (Max)：1nA
Crosstalk：-74dB @ 500kHz
Operating Temperature：-55°C ~ 125°C (TA)
Mounting Type：Through Hole
Package / Case：14-CDIP (0.300", 7.62mm)
Supplier Device Package：14-CERDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG304AAK/883

DG304AAK/883

Analog Switches, Multiplexers, Demultiplexers Overview

The DG304AAK/883 is a high-speed, quad single-pole single-throw (SPST) CMOS analog switch manufactured by Vishay Siliconix. It operates within a dual supply voltage range of ±15 V to ±22 V and supports a single supply up to 30 V. The device features a maximum on-resistance of 75 Ohms and a typical on-resistance matching of 0.1 Ohm. Switching times are specified at 60 ns for turn-on and 40 ns for turn-off. It includes an enable input for power-down control, reducing supply current to less than 1 µA. The component is housed in a hermetically sealed CDIP-16 package and is rated for an operating temperature range from -55°C to +125°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Hermetically sealed ceramic package designed for military and aerospace environments
Low power consumption with dedicated enable pin for deep sleep mode
High speed switching performance suitable for data acquisition systems
Tight on-resistance matching ensures signal integrity across channels

Analog Switches, Multiplexers, Demultiplexers Applications

Military and aerospace signal routing
High-speed data acquisition systems
Process control instrumentation
Medical equipment signal switching

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix /883 indicates compliance with MIL-PRF-38534 or equivalent military standards. Confirm that the CDIP-16 package meets required thermal and mechanical specifications for the target application environment. Ensure availability through authorized distributors as this may be a controlled item.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when hermetic sealing and wide temperature operation are mandatory. Compare on-resistance and leakage current requirements against lower-cost commercial alternatives if environmental constraints allow. Verify that the ±15 V to ±22 V supply range aligns with system power rails.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the DG304 family of quad SPST analog switches. The /883 suffix typically denotes a military-grade version compliant with specific reliability standards. It shares functional similarities with other DG series switches but offers enhanced ruggedness and temperature stability compared to standard commercial variants.