EL5101IW-T7A

Instrumentation, Op Amps, Buffer Amps Overview

The EL5101IW-T7A is a single-channel, high-speed voltage feedback amplifier from the Intersil EL5100 family. It operates on single 5V or ±5V supplies with a minimum supply current of 2.5mA. Key electrical parameters include a -3dB bandwidth of 200MHz, a slew rate of 2200V/µs, and a maximum offset voltage of 4mV. The device provides an output current of 100mA and features a differential gain/phase of 0.08%/0.1°. It is specified for commercial temperature ranges.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Combines high slew rate benefits of current feedback architecture with stability of voltage feedback type.
• Features low power consumption with minimum supply current of 2.5mA per amplifier.

Instrumentation, Op Amps, Buffer Amps Applications

• Video amplifiers
• A/D drivers
• Line drivers
• RGB applications

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the manufacturer source, as Intersil operations were acquired by Renesas Electronics. Confirm the specific datasheet revision matches the required performance specifications. Ensure the component meets RoHS compliance standards if required by the design. Check for moisture sensitivity level requirements during storage and handling procedures.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for designs requiring high-speed signal processing with low power constraints. The 200MHz bandwidth suits video and communication applications. Consider the SOT-23-5 package for space-constrained PCB layouts. Verify that the 100mA output current meets the load driving requirements of the downstream circuitry.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the EL5100 series, which includes single, dual, and triple versions with varying bandwidths. The EL5101 specifically offers 200MHz performance. The 'IW' suffix indicates the plastic SOT-23 package, while '-T7A' denotes tape and reel packaging. This family bridges the gap between CFA speed and VFA ease of use.

Instrumentation, Op Amps, Buffer Amps FAQ

Does the EL5101 have an output enable function?

No, the output enable function is available in the EL5100 and EL5300 variants, but not in the EL5101.

What is the typical power-down current for this amplifier?

The family supports power-down to 17µA per amplifier, though specific standby modes should be verified in the datasheet.