EL5300IU-T7

Description：IC OPAMP VFB 3 CIRCUIT 16QSOP
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR)

SKU:8e0da8225850 Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

EL5300IU-T7 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC OPAMP VFB 3 CIRCUIT 16QSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for EL5300IU-T7

Description：IC OPAMP VFB 3 CIRCUIT 16QSOP
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR)
Amplifier Type：Voltage Feedback
Number of Circuits：3
Output Type：-
Slew Rate：2200V/µs
Gain Bandwidth Product：-
Current - Input Bias：2 µA
Voltage - Input Offset：1 mV
Current - Supply：2.5mA (x3 Channels)
Current - Output / Channel：100 mA
Voltage - Supply Span (Min)：3.5 V
Voltage - Supply Span (Max)：12 V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：16-SSOP (0.154", 3.90mm Width)
Supplier Device Package：16-QSOP
-3db Bandwidth：200 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for EL5300IU-T7

EL5300IU-T7

Instrumentation, Op Amps, Buffer Amps Overview

The EL5300IU-T7 is a triple-channel, high-speed voltage feedback amplifier from the EL5100/EL5300 family. It combines current feedback slew rate benefits with voltage feedback stability. Key parameters include a 200MHz -3dB bandwidth, 2200V/µs slew rate, and 4mV maximum offset voltage. It operates on single 5V or ±5V supplies with a typical supply current of 2.5mA per amplifier. The device features an output enable function for multiplexing applications.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Combines high slew rate performance of current feedback architecture with the stability of voltage feedback topology
Includes an output enable pin to place outputs in a high-impedance state for multiplexing
Capable of driving low impedance loads with up to 100mA output current
Supports power-down mode reducing supply current significantly

Instrumentation, Op Amps, Buffer Amps Applications

Video amplifiers
A/D drivers
Line drivers
RGB applications
Active filtering

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify component authenticity through authorized channels as this part may be subject to obsolescence. Confirm package integrity and moisture sensitivity level handling requirements before assembly. Ensure datasheet version FN7330.3 matches procurement specifications. Cross-reference ordering suffixes carefully to confirm tape and reel packaging details.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high slew rates are required alongside voltage feedback stability. Suitable for applications needing multiple amplifiers in a single package with independent enable control. Consider thermal dissipation limits in QSOP-16 packages. Verify power supply bypassing strategies due to high bandwidth characteristics.

Instrumentation, Op Amps, Buffer Amps Part Context

Part of the EL5100/EL5101/EL5300 family offering single, dual, and triple configurations. Manufactured by Intersil (now Renesas). Designed for high-speed signal processing requiring minimal distortion. Available in SOIC, SOT-23, and QSOP packages.