ET2424-013

Common Mode Chokes Overview

The ET2424-013 is a two-line common mode choke manufactured by Triad Magnetics, designed for through-hole mounting. It features an inductance of 9.2 mH measured at a test frequency of 10 kHz and supports a maximum DC current of 700 mA. The component has a maximum DC resistance (DCR) of 750 mOhms. Its physical dimensions are 26.50 mm in length and width, with a maximum height of 23.00 mm. The unit operates within a temperature range of -20°C to +105°C and complies with RoHS standards.

Common Mode Chokes Feature Summary

• Provides effective common mode noise suppression for differential signal lines
• Constructed for reliable through-hole PCB integration
• Operates effectively across a wide industrial temperature range

Common Mode Chokes Applications

• Power supply input filtering
• Differential data line protection
• EMI suppression in electronic equipment

Common Mode Chokes Procurement Notes

Verify the specific part number ET2424-013 against official Triad Magnetics documentation to confirm electrical parameters such as 9.2 mH inductance and 700 mA current rating. Ensure compatibility with through-hole assembly processes and check for required safety certifications like UL or CSA if applicable to the end product design.

Common Mode Chokes Selection Notes

Select this component when a high-inductance common mode choke is required for low-current applications up to 700 mA. The 9.2 mH value offers significant attenuation at 10 kHz. Consider the 26.50 mm square footprint and 23.00 mm height for adequate clearance on the printed circuit board layout.

Common Mode Chokes Part Context

This component belongs to the ET series of common mode chokes from Triad Magnetics. The series typically includes various inductance and current ratings tailored for different filtering requirements. The ET2424-013 specifically addresses needs for higher inductance in compact through-hole packages.

Common Mode Chokes Replacement Considerations

Consult Triad Magnetics datasheets for direct equivalents within the ET series. Verify that any substitute matches the 9.2 mH inductance, 700 mA current rating, and 750 mOhm DCR specifications to ensure circuit performance integrity.