F44G36

Overview

The Hoffman F44G36 is a straight section wireway designed for cable management. It features a 4-inch width and 4-inch height with a length of 36 inches. Constructed from 16-gauge steel, it includes a removable hinged cover. The unit has an ANSI 61 gray polyester powder painted finish and meets UL 870 standards. It is classified as NEMA Type 1 and IP30, providing protection for wires and cables in indoor and outdoor environments.

Feature Summary

• Lay-in design allows for easy installation without removing the cover
• Hinged cover facilitates access to internal wiring
• Corrosion-resistant polyester powder coating
• Open-top construction simplifies wire placement

Applications

• Enclosing wire and cable in wireway runs
• Protecting wires in corrosive indoor environments
• Protecting wires in dirty outdoor environments

Procurement Notes

Verify that the specific order matches the F44G36 designation for the 4x4 inch cross-section and 36-inch length. Confirm the requirement for a lay-in style with a hinged cover. Ensure compatibility with existing Hoffman wireway fittings if part of a larger run. Check for any specific regional certification requirements beyond UL 870.

Selection Notes

Select this model when a 4-inch by 4-inch wireway capacity is required for a 3-foot span. The lay-in feature is suitable for applications where frequent access or simplified initial installation is prioritized over fully enclosed trunking. Consider the NEMA Type 1 rating for general purpose indoor or protected outdoor use.

Part Context

This component belongs to the Hoffman Lay-In series of wireways. These sections are characterized by their open-top design and hinged covers, distinguishing them from fully enclosed conduit systems. They are commonly used in industrial settings for organizing electrical cabling within controlled environments.

Replacement Considerations

Direct substitutes may include other manufacturers' NEMA Type 1 wireways with identical 4x4 inch dimensions and 36-inch lengths. Verify that replacement units also offer lay-in functionality and compatible mounting hardware.