FBA04HA600AB-00

Chip Ferrite Bead Overview

The FBA04HA600AB-00 is a leaded ferrite bead inductor from the Taiyo Yuden FB series, designed for axial mounting. It exhibits an impedance of 60 Ohms at a test frequency of 50 MHz. The component supports a maximum DC current of 7 A with a maximum DC resistance of 1 mOhm. Physical dimensions include a length of 8.5 mm and a diameter of 3.5 mm. It operates within a temperature range of -25°C to +85°C and is supplied in Ammo Pack packaging.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference suppression through high impedance characteristics at specific frequencies
• Features axial termination style for through-hole circuit board integration
• Constructed as a single-line ferrite bead inductor

Chip Ferrite Bead Applications

• Noise filtering in power supply lines
• Signal integrity enhancement in electronic circuits
• Electromagnetic compatibility improvement in consumer electronics

Chip Ferrite Bead Procurement Notes

This component is classified as obsolete or end-of-life. Availability is restricted, and distributors may not stock this part number. Verify discontinuation status and check for valid replacement alternatives before finalizing design specifications.

Chip Ferrite Bead Selection Notes

Select this component when axial ferrite beads are required for noise suppression. Ensure the application current does not exceed 7 A and verify that the 60 Ohm impedance at 50 MHz aligns with the target noise profile. Confirm physical space constraints match the 8.5 mm length and 3.5 mm diameter.

Chip Ferrite Bead Part Context

Part of the Taiyo Yuden FB series of leaded ferrite bead inductors. This series offers various impedance values and package options for different filtering requirements. The FBA04HA600AB-00 specifically targets applications needing moderate impedance with high current handling capabilities in an axial form factor.

Chip Ferrite Bead Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation due to the obsolete status. Consult manufacturer archives for direct cross-references or equivalent series components with matching electrical parameters.

Chip Ferrite Bead FAQ

What is the test frequency for the impedance rating?

The impedance of 60 Ohms is rated at a test frequency of 50 MHz.

What is the maximum DC current rating?

The component can handle a maximum DC current of 7 A.