FODM217AV

$0.56

Description：OPTOISO 3.75KV 1CH TRANS 4-SOP
Series：FODM217
Mfr：onsemi
Package：Tube

SKU:ed0528d35aa7 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

FODM217AV is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 3.75KV 1CH TRANS 4-SOP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for FODM217AV

Description：OPTOISO 3.75KV 1CH TRANS 4-SOP
Series：FODM217
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：3750Vrms
Current Transfer Ratio (Min)：80% @ 5mA
Current Transfer Ratio (Max)：160% @ 5mA
Turn On / Turn Off Time (Typ)：3µs, 3µs
Rise / Fall Time (Typ)：2µs, 3µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：80V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 110°C
Mounting Type：Surface Mount
Package / Case：4-SOIC (0.173", 4.40mm Width)
Supplier Device Package：4-SOP
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for FODM217AV

FODM217AV

Transistor, Photovoltaic Output Optoisolators Overview

The FODM217AV is a single-channel transistor output optocoupler from onsemi, featuring an NPN phototransistor. It provides 3750 Vrms insulation voltage and operates within a -55°C to +110°C temperature range. The device supports a maximum forward current of 50 mA with a typical forward voltage of 1.4 V. Collector-emitter saturation voltage is 400 mV max, with rise/fall times of 3 µs. Current transfer ratio ranges from 80% to 160%. Power dissipation is 150 mW, and it is housed in a SOP-4 surface-mount package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Single-channel AC/DC sensing input configuration
High insulation voltage for safety isolation
Fast switching speed suitable for digital signals

Transistor, Photovoltaic Output Optoisolators Applications

General-purpose signal isolation
Digital communication interfaces
Microcontroller I/O isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix 'AV' against the official datasheet to confirm the exact current transfer ratio binning and packaging type (tube vs. reel). Ensure the SOP-4 footprint matches the design layout. Confirm RoHS compliance status as indicated in the manufacturer's documentation before finalizing procurement specifications.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a low-cost, single-channel isolation solution with moderate speed is required. The NPN phototransistor output is suitable for standard logic interfacing. Consider the 80-160% CTR range for circuit design margins. Compare against other FODM217 variants if higher CTR or different packaging is needed.

Transistor, Photovoltaic Output Optoisolators Part Context

Part of the FODM217A series, designed for general-purpose isolation applications. It offers a balance of performance and cost-effectiveness. The SOP-4 package allows for compact PCB designs. It is distinct from higher-speed or higher-CTR variants within the broader FODM217 family.