HCF4052M013TR

$0.32

Description：IC SWITCH SP4T X 2 280OHM 16SO
Series：-

SKU:540cf5a63dfa Category: Analog Switches, Multiplexers, Demultiplexers Brand: STMicroelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCF4052M013TR is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists STMicroelectronics. Its product description is IC SWITCH SP4T X 2 280OHM 16SO. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for HCF4052M013TR

Description：IC SWITCH SP4T X 2 280OHM 16SO
Series：-
Mfr：STMicroelectronics
Package：Tape & Reel (TR),Cut Tape (CT)
Switch Circuit：SP4T
Multiplexer/Demultiplexer Circuit：4:01
On-State Resistance (Max)：280Ohm
Channel-to-Channel Matching (ΔRon)：5Ohm
Voltage - Supply, Single (V+)：3V ~ 20V
Voltage - Supply, Dual (V±)：-
Switch Time (Ton, Toff) (Max)：-
-3db Bandwidth：60MHz
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：0.2pF, 5pF
Current - Leakage (IS(off)) (Max)：100nA
Crosstalk：-40dB @ 10MHz
Operating Temperature：-55°C ~ 125°C (TA)
Mounting Type：Surface Mount
Package / Case：16-SOIC (0.154", 3.90mm Width)
Supplier Device Package：16-SO
Number of Circuits：2
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for HCF4052M013TR

HCF4052M013TR

Analog Switches, Multiplexers, Demultiplexers Overview

The HCF4052M013TR is a differential 4-channel analog multiplexer/demultiplexer fabricated in MOS technology, available in SO-16 packages. It features two binary control inputs and an inhibit input to select one of four channel pairs. The device operates with a supply voltage range of 3 V to 20 V and supports analog signals up to 20 V peak-to-peak. Key electrical parameters include a typical ON resistance of 125 Ω at 15 V supply, maximum propagation delay of 720 ns, and quiescent current of 3000 nA max at 20 V.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Digitally controlled analog switching with low ON impedance and very low OFF leakage current
Differential architecture supporting simultaneous selection of paired X and Y channels
High linearity with less than 0.5% distortion under specified conditions
Extremely low quiescent power dissipation independent of logic control states

Analog Switches, Multiplexers, Demultiplexers Applications

Time-division signal routing in measurement systems
Data acquisition systems requiring analog channel selection
Audio signal processing applications utilizing differential paths

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering code suffix against official manufacturer documentation to confirm package type and reel specifications. Ensure compatibility with standard SOP-16 footprint dimensions during PCB layout. Confirm that the component meets required environmental operating temperatures for the intended application environment before finalizing procurement.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when differential analog switching is required within a single package. Verify that the system supply voltage falls within the 3 V to 20 V operational range. Consider the maximum propagation delay and ON resistance variations across temperature ranges to ensure signal integrity requirements are met for the target frequency response.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the HCF4052B series of CMOS analog switches manufactured by STMicroelectronics. It is functionally related to other devices in the HCF4051 and HCF4053 families, offering similar multiplexing capabilities with varying channel counts and configurations. The M013TR suffix indicates the specific surface-mount tape and reel packaging format.