HI-8200PSIF

Analog Switches, Multiplexers, Demultiplexers Overview

The HI-8200PSIF is a quad single-pole single-throw (SPST) normally open analog switch manufactured by Holt Integrated Circuits Inc. It utilizes Insulator on Silicon (SOI) technology to achieve low leakage and latch-up immunity. The device operates with a single 3.3V or 5V supply, generating internal high-voltage gate drive for +/-12V switching ranges. Typical on-resistance (RON) is 8 ohms at VDD 3.0V to 5.5V, with deviation less than 5% over a -5V to +5V signal range. Switching times are typically 180ns for turn-on and 60ns for turn-off. Charge injection is below 10pC, and off-state leakage is under 10nA. It supports up to 5kHz switching frequency and functions in temperatures from -55°C to 200°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Built with robust Insulator on Silicon (SOI) technology for latch-up-free operation and low off-state leakage.
• Integrates on-chip high-voltage gate drivers allowing full +/-12V signal swing from a single 3.3V or 5V logic supply.
• Provides bidirectional signal conduction with consistent on-resistance independent of the supply voltage level.
• Designed for extreme thermal environments, supporting continuous operation up to 200 degrees Celsius.

Analog Switches, Multiplexers, Demultiplexers Applications

• High temperature avionics systems
• Oil exploration and down-hole drilling equipment
• Data bus isolation circuits
• Precision data acquisition systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix PSIF against the manufacturer's current datasheet to confirm package type and temperature grade. Ensure the ordering documentation matches the exact part number to avoid confusion with similar HI-8200 variants that may have different pinouts or electrical characteristics. Confirm RoHS compliance status if required for the specific manufacturing process.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when high-temperature reliability and low charge injection are critical requirements. The integrated gate driver simplifies power supply design by eliminating external high-voltage generation circuits. Verify that the 8-ohm typical on-resistance meets the signal integrity needs of the application circuit. Consider the 16-pin CSP package constraints for PCB layout and thermal management.

Analog Switches, Multiplexers, Demultiplexers Part Context

This device belongs to the HI-8200H series of analog switches designed specifically for harsh environment applications. It shares the core SOI technology and high-temperature capabilities with other members like the HI-8201H and HI-8202H, differing primarily in the configuration of normally open and normally closed channels within the quad SPST architecture.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Engineering evaluation is required to verify compatibility with existing designs if alternative components are considered.