IH5040CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The IH5040CPE is a dual single-pole single-throw (SPST) normally open CMOS analog switch manufactured by Analog Devices Inc. under the Maxim Integrated brand. It operates on a dual supply voltage ranging from ±4.5 V to ±18 V. The device features a maximum on-resistance of 80 Ohms and supports a continuous DC switch current of 30 mA. Switching times are specified with a maximum turn-on time of 400 ns and a maximum turn-off time of 200 ns. It is housed in a 16-PDIP package and functions within an operating temperature range of 0°C to +70°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Dual SPST configuration for independent signal routing
• CMOS technology enabling low power consumption
• Normally open state for default signal isolation

Analog Switches, Multiplexers, Demultiplexers Applications

• Signal multiplexing in data acquisition systems
• Audio and video signal path switching
• Test and measurement equipment input selection

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels due to potential availability constraints. Confirm package integrity and pin alignment upon receipt. Check for specific lot codes if traceability is required for quality assurance protocols. Ensure storage conditions comply with moisture sensitivity level requirements before soldering.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when dual isolated signal paths are required within a single package. Verify that the system voltage does not exceed the ±18 V limit. Consider the 80 Ohm on-resistance impact on signal attenuation for high-impedance sources. Ensure the PCB layout accommodates the 16-pin DIP footprint and thermal dissipation needs.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the IH504x series of analog switches, which provides multiple channel configurations including quad SPST variants. The series is designed for general-purpose analog signal switching applications requiring low distortion and fast switching speeds. It serves as a legacy component in designs transitioning from older bipolar switch technologies.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Direct pin-compatible replacements include other members of the IH504x family such as the IH5041CPE or IH5042CPE, provided the channel count matches the design requirement. Verify electrical parameters like on-resistance and leakage current against the original specification sheet.