MAX392EPE

$2.66

Description：IC SWITCH SPST-NOX4 35OHM 16DIP
Series：-

SKU:04e25f55b1e5 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX392EPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NOX4 35OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX392EPE

Description：IC SWITCH SPST-NOX4 35OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Bulk
Switch Circuit：SPST - NO
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：35Ohm
Channel-to-Channel Matching (ΔRon)：300mOhm
Voltage - Supply, Single (V+)：3V ~ 15V
Voltage - Supply, Dual (V±)：±3V ~ 8V
Switch Time (Ton, Toff) (Max)：130ns, 75ns
-3db Bandwidth：-
Charge Injection：2pC
Channel Capacitance (CS(off), CD(off))：9pF, 9pF
Current - Leakage (IS(off)) (Max)：100pA
Crosstalk：-85dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX392EPE

MAX392EPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX392EPE is a quad single-pole single-throw (SPST) normally open analog switch manufactured by Analog Devices Inc./Maxim Integrated. It features four independent channels within a 16-pin PDIP package. The device operates on a single supply voltage ranging from 3V to 15V or dual supplies of ±3V to ±8V. Key electrical specifications include a maximum on-resistance of 35 ohms, channel-to-channel matching of 300 milliohms, and a typical charge injection of 2 picocoulombs. Switching times are specified at a maximum of 130ns for turn-on and 75ns for turn-off.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Integrates four independent SPST switches in a single package
Provides low on-resistance with tight channel-to-channel matching
Supports both single and dual power supply configurations
Features low charge injection for signal integrity

Analog Switches, Multiplexers, Demultiplexers Applications

Signal routing in data acquisition systems
Audio and video signal switching
Programmable gain amplifier circuits
Communication equipment signal paths

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix EPE indicates the PDIP-16 through-hole package variant. Confirm RoHS compliance status as historical data may vary by production batch. Check current availability as older Maxim Integrated parts may have limited stock or end-of-life status. Ensure the supplier provides valid traceability documentation for component authenticity.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a quad SPST configuration is required for analog signal switching. Compare against the MAX391 series if normally closed operation is needed instead. Verify that the 35-ohm on-resistance meets the application's voltage drop requirements. Ensure the 16-pin DIP package fits the target PCB layout constraints.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MAX391-MAX393 family of CMOS analog switches. These devices are designed for general-purpose analog signal switching applications requiring low distortion and fast switching speeds. The MAX392 specifically offers the normally open configuration, distinguishing it from the normally closed MAX391.