MAX4553EPE

$1.79

Description：IC SW SPST-NO/NCX4 120OHM 16DIP
Series：-

SKU:2a2669fa9230 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4553EPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW SPST-NO/NCX4 120OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4553EPE

Description：IC SW SPST-NO/NCX4 120OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NO/NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：120Ohm
Channel-to-Channel Matching (ΔRon)：1Ohm
Voltage - Supply, Single (V+)：2V ~ 12V
Voltage - Supply, Dual (V±)：±2V ~ 6V
Switch Time (Ton, Toff) (Max)：110ns, 90ns
-3db Bandwidth：-
Charge Injection：2pC
Channel Capacitance (CS(off), CD(off))：3.5pF, 3pF
Current - Leakage (IS(off)) (Max)：1nA
Crosstalk：-90dB @ 100kHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4553EPE

MAX4553EPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4553EPE is a quad, low-voltage, single-pole/single-throw (SPST) analog switch in a 16-pin Plastic DIP package. It integrates two normally closed and two normally open switches. The device operates with dual supplies from ±2V to ±6V or a single supply between +2V and +12V. Key electrical parameters include a maximum on-resistance of 120Ω, an on-resistance match of 8Ω, and off-leakage current of 1nA at +25°C. It provides ±15kV ESD protection per IEC 1000-4-2 and features TTL/CMOS-compatible logic inputs.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Quad SPST configuration with two normally closed and two normally open channels
±15kV electrostatic discharge protection compliant with IEC 1000-4-2 standards
Rail-to-Rail signal handling capability across the full supply range
TTL and CMOS logic input compatibility for standard digital interfaces

Analog Switches, Multiplexers, Demultiplexers Applications

Battery-operated equipment
Data acquisition systems
Test equipment
Avionics
Audio signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'EPE' confirms the -40°C to +85°C industrial temperature range and 16-pin PDIP package. Confirm RoHS compliance status as original Maxim specifications may vary by production era. Ensure the source document matches the exact part number to avoid confusion with the C-grade commercial variant.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a mix of normally open and normally closed switching is required within a single package. The MAX4553 is distinct from the MAX4551 (all NC) and MAX4552 (all NO). Verify that the 120Ω maximum on-resistance meets the application's voltage drop requirements compared to lower-resistance alternatives.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4553 belongs to the MAX4551/MAX4552/MAX4553 family of low-voltage CMOS analog switches. These devices are pin-compatible with industry-standard DG211/DG212/DG213 switches, facilitating direct upgrades or replacements in existing designs requiring enhanced ESD protection and lower power consumption.