MBR1090FCT_T0_00001

Diode Arrays Overview

The MBR1090FCT_T0_00001 is a silicon Schottky barrier rectifier from the Panjit MBR1040FCT series, rated for 10 amperes average forward current and 90 volts maximum repetitive peak reverse voltage. It utilizes an ITO-220AB molded plastic case with solder-plated terminals compliant with MIL-STD-750 Method 2026. The device features low power loss, high efficiency, and a typical thermal resistance of 2°C/W. Electrical characteristics include a maximum forward voltage of 0.9V at 5A per leg and a surge current capability of 150A. Operating junction temperature ranges from -55°C to +150°C.

Diode Arrays Feature Summary

• Utilizes metal-silicon junction technology for majority carrier conduction, ensuring low forward voltage drop and minimal switching losses.
• Encased in flame-retardant epoxy molding compound classified as UL 94V-O, providing mechanical robustness and environmental protection.
• Manufactured using lead-free materials compliant with EU RoHS 2.0 directives and halogen-free standards per IEC61249.

Diode Arrays Applications

• Low voltage, high frequency inverters
• Free wheeling diode circuits
• Polarity protection applications

Diode Arrays Procurement Notes

Verify the specific ordering suffix T0_00001 against official Panjit documentation to confirm packing configuration. The code indicates Tape and Reel (T/R) packaging with a 13-inch reel size and RoHS compliance. Ensure the component lot number is recorded upon receipt for traceability purposes, as Panjit uses lot numbers as the primary tracking base for quality control and support inquiries.

Diode Arrays Selection Notes

Select this component when designing circuits requiring a 10A continuous current rating with a 90V blocking voltage. The ITO-220AB package facilitates efficient heat dissipation through flange mounting, suitable for applications where thermal management is critical. Consider the 0.9V forward voltage characteristic for efficiency calculations in low-voltage DC-DC conversion or power supply output rectification stages.

Diode Arrays Part Context

This part belongs to the MBR1040FCT~MBR10200FCT series of 10 Ampere Schottky Barrier Rectifiers manufactured by Panjit International Inc. The series offers various voltage ratings from 40V to 200V within the same physical footprint. The MBR1090FCT variant specifically addresses applications needing 90V reverse blocking capability while maintaining the high current handling and low loss characteristics defined by the series design.

Diode Arrays Replacement Considerations

Cross-reference with other manufacturers' 10A/90V Schottky rectifiers in TO-220AB or equivalent ITO-220AB packages. Verify that substitute parts meet the same electrical limits for VRRM, IF(AV), and VF, and ensure mechanical pinout compatibility before implementation.

Diode Arrays FAQ

What is the maximum non-repetitive peak forward surge current for the MBR1090FCT?

The maximum peak forward surge current is 150 Amperes, measured as an 8.3ms single half sine-wave superimposed on the rated load.

Does the MBR1090FCT comply with environmental directives?

Yes, the device is lead-free in compliance with the EU RoHS 2.0 directive (2011/65/EU & 2015/865/EU) and uses a green molding compound that is halogen-free according to IEC61249 standards.

How does the forward current capacity change with temperature?

The device requires current derating based on ambient temperature. Refer to Figure 1 (Forward Current Derating Curve) in the datasheet for specific reduction percentages as temperature increases beyond standard conditions.