MC100H607FNR2G

$6.19

Description：IC TRANSLATOR UNIDIR 28PLCC
Series：100H
Mfr：onsemi
Package：Bulk

SKU:8afb7b0ab8f6 Category: Translators, Level Shifters Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MC100H607FNR2G is listed in the Translators, Level Shifters range at ChipApex. The manufacturer field lists onsemi. Its product description is IC TRANSLATOR UNIDIR 28PLCC. Review the specifications below when checking this part for your BOM.

Translators, Level Shifters specifications for MC100H607FNR2G

Description：IC TRANSLATOR UNIDIR 28PLCC
Series：100H
Mfr：onsemi
Package：Bulk
Translator Type：Mixed Signal
Channel Type：Unidirectional
Number of Circuits：1
Channels per Circuit：6
Input Signal：PECL
Output Signal：TTL
Output Type：Non-Inverted
Data Rate：-
Operating Temperature：0°C ~ 85°C (TA)
Features：-
Mounting Type：Surface Mount
Package / Case：28-LCC (J-Lead)
Supplier Device Package：28-PLCC (11.51x11.51)
Voltage - VCCA：-
Voltage - VCCB：-
Grade：-
Qualification：-

Translators, Level Shifters datasheet and documents for MC100H607FNR2G

MC100H607FNR2G

Translators, Level Shifters Overview

The MC100H607FNR2G is a registered Hex PECL to TTL translator manufactured by onsemi. It features differential PECL inputs for both data and clock, with TTL outputs providing 48 mA sink and 24 mA source drive capability. The device operates on a single +5.0 V power supply and includes an asynchronous master reset control input at ECL levels. It is housed in a PLCC-28 package.

Translators, Level Shifters Feature Summary

Differential PECL data and clock inputs
High-drive TTL outputs (48 mA sink, 24 mA source)
Asynchronous master reset control
Multiple power and ground pins

Translators, Level Shifters Applications

HPPI bus type board-to-board interface receive function
Synchronizing data between boards
PECL to TTL translation

Translators, Level Shifters Procurement Notes

Verify the specific ordering suffix 'FNR2G' confirms the PLCC-28 tape and reel packaging format and lead-free status. Confirm compatibility with the 100K logic level standard (+5.0 V) rather than the MECL 10H variant. Ensure the application design accounts for the multiple power and ground pin requirements to minimize noise as specified in the datasheet.

Translators, Level Shifters Selection Notes

Select this component when a registered translation from differential PECL signals to high-drive TTL outputs is required. The integrated registers simplify synchronization tasks in board-to-board interfaces. Verify that the system voltage aligns with the +5.0 V requirement and that the PLCC-28 surface mount package fits the PCB layout constraints.

Translators, Level Shifters Part Context

This part belongs to the MC10H/100H607 family of registered hex translators. The '100H' designation indicates compatibility with 100K logic levels, distinguishing it from the '10H' version which supports MECL 10H levels. Both variants share the same functional architecture and pinout but differ in specific input threshold characteristics.