MCT272XG

$0.50

Description：OPTOISO 5.3KV TRANS W/BASE 6-DIP
Series：MCT27x
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:30907f366f14 Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCT272XG is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISO 5.3KV TRANS W/BASE 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MCT272XG

Description：OPTOISO 5.3KV TRANS W/BASE 6-DIP
Series：MCT27x
Mfr：Isocom Components 2004 LTD
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：75% @ 10mA
Current Transfer Ratio (Max)：150% @ 10mA
Turn On / Turn Off Time (Typ)：10µs, 10µs (Max)
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MCT272XG

MCT272XG

Transistor, Photovoltaic Output Optoisolators Overview

The MCT272XG is a single-channel optoisolator manufactured by Isocom Components 2004 LTD. It features an infrared LED input and a transistor with base output, housed in a 6-pin DIP package. The device provides an isolation voltage of 5300Vrms. Key electrical parameters include a maximum forward voltage of 1.65V, a maximum input current of 60 mA, and a typical rise time of 4.6µs. The current transfer ratio ranges from 160% to 320%, with a typical fall time of 15µs.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Integrates an infrared emitting diode with a phototransistor output for signal isolation
Provides high-voltage electrical isolation between input and output circuits
Designed for through-hole mounting in standard DIP configurations

Transistor, Photovoltaic Output Optoisolators Applications

General-purpose signal isolation in electronic circuits
Interface applications requiring galvanic separation
Digital signal transmission across isolated boundaries

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific manufacturer designation and datasheet version before procurement. Confirm that the 6-DIP package dimensions and pinout match the target PCB layout. Ensure the isolation voltage rating of 5300Vrms meets the safety requirements of the intended application environment.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a single-channel transistor output is required for moderate-speed digital isolation. Consider the 160-320% current transfer ratio range for circuit gain calculations. Verify that the 60mA maximum input current and 1.65V forward voltage are compatible with the driving logic levels.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the family of infrared optoelectronic devices produced by Isocom Components 2004 LTD. The manufacturer specializes in optocouplers and optoswitches, leveraging decades of expertise in infrared technology. The MCT272XG represents a standard discrete optoisolation solution within their portfolio.