MF72-005D20

$3.13

Description：ICL 5 OHM 20% 7A 22.5MM
Series：MF72
Mfr：Cantherm
Package：Bulk

SKU:6e6581a573c5 Category: Inrush Current Limiters (ICL) Brand: Cantherm

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MF72-005D20 is listed in the Inrush Current Limiters (ICL) range at ChipApex. The manufacturer field lists Cantherm. Its product description is ICL 5 OHM 20% 7A 22.5MM. Review the specifications below when checking this part for your BOM.

Inrush Current Limiters (ICL) specifications for MF72-005D20

Description：ICL 5 OHM 20% 7A 22.5MM
Series：MF72
Mfr：Cantherm
Package：Bulk
R @ 25°C：5 Ohms
Tolerance：±20%
Current - Steady State Max：7:00 AM
R @ Current：87 mOhms
Diameter：0.886" (22.50mm)
Lead Spacing：0.394" (10.00mm)
Grade：-
Qualification：-
Approval Agency：-

Inrush Current Limiters (ICL) datasheet and documents for MF72-005D20

MF72-005D20

Inrush Current Limiters (ICL) Overview

The Cantherm MF72-005D20 is an inrush current limiter (ICL) belonging to the MF72 series. It features a nominal resistance of 5 Ohms with a tolerance of ±20%. The component supports a maximum steady-state current of 7 A and has a disk diameter of 0.886 inches (22.50 mm). It utilizes radial through-hole mounting with a lead spacing of 0.394 inches (10.00 mm).

Inrush Current Limiters (ICL) Feature Summary

Functions as an inrush current limiter to protect electronic circuits from high initial charging currents.
Constructed as a negative temperature coefficient (NTC) thermistor for overload protection applications.

Inrush Current Limiters (ICL) Applications

Power supply input stages
Electronic ballast protection
Overload protection circuits

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific manufacturer datasheet for thermal derating curves and energy absorption ratings before integration. Confirm that the steady-state current rating of 7 A aligns with the operational requirements of the target circuit design.

Inrush Current Limiters (ICL) Selection Notes

Select this component based on the required 5 Ohm resistance value and 7 A current handling capacity. Ensure the physical dimensions, specifically the 22.50 mm diameter and 10.00 mm lead spacing, fit the available board space and mounting constraints.

Inrush Current Limiters (ICL) Part Context

This part belongs to the Cantherm MF72 series of NTC thermistors designed for inrush current limiting. These components are typically used in power electronics to mitigate stress on rectifiers and capacitors during startup phases.