MOC3011M

$0.65

Description：OPTOISOLTR 4.17KV TRIAC 1CH 6DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:6f2e3a8d2df5 Category: Triac, SCR Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC3011M is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 4.17KV TRIAC 1CH 6DIP. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for MOC3011M

Description：OPTOISOLTR 4.17KV TRIAC 1CH 6DIP
Series：-
Mfr：onsemi
Package：Tube
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：4170Vrms
Voltage - Off State：250 V
Static dV/dt (Min)：-
Current - LED Trigger (Ift) (Max)：10mA
Current - On State (It (RMS)) (Max)：-
Current - Hold (Ih)：100µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：60 mA
Operating Temperature：-40°C ~ 85°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.300", 7.62mm)
Supplier Device Package：6-DIP
Approval Agency：UL

Triac, SCR Output Optoisolators datasheet and documents for MOC3011M

MOC3011M

Triac, SCR Output Optoisolators Overview

The MOC3011M is a random-phase Triac driver output optocoupler manufactured by onsemi. It integrates a Gallium Arsenide infrared emitting diode with a light-activated silicon bilateral switch, providing electrical isolation without zero-crossing circuitry. The device features a PDIP-6 through-hole package and supports an insulation voltage of 5300 Vrms. Key electrical parameters include a maximum forward current of 60 mA, a peak off-state voltage (VDRM) of 250 V, and a maximum trigger current of 10 mA. It operates within a temperature range of -40°C to +85°C.

Triac, SCR Output Optoisolators Feature Summary

Random-phase triac driver output for non-synchronized AC control
Integrated GaAs infrared LED and light-activated silicon bilateral switch
High insulation voltage capability for safety isolation

Triac, SCR Output Optoisolators Applications

Solid-state relay circuits
AC motor speed control systems
Lighting dimmer applications

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific ordering suffix against official documentation to ensure correct packaging and compliance status. Confirm that the PDIP-6 through-hole package aligns with PCB layout requirements. Check RoHS and REACH declarations for regulatory adherence in target markets. Ensure supply chain stability due to reported long delivery times from the manufacturer.

Triac, SCR Output Optoisolators Selection Notes

Select this component when random-phase triggering is required rather than zero-crossing switching. Verify that the 250 V peak off-state voltage meets the load requirements. Ensure the design accommodates the 60 mA maximum forward current limit for the input LED. Consider the PDIP-6 package dimensions for mechanical integration.

Triac, SCR Output Optoisolators Part Context

The MOC3011M belongs to the MOC301XM series of optically isolated triac drivers. This family provides galvanic isolation between low-voltage control circuits and high-voltage AC loads. The device is designed for general-purpose AC power control applications requiring simple interface and reliable performance.