MPC8377EVRAJF

Microprocessors Overview

The MPC8377EVRAJF is a PowerQUICC II Pro microprocessor based on the Power Architecture e300 core. It operates at a maximum clock frequency of 800 MHz with a 32-bit data bus width. The device integrates 32 kB L1 instruction and 32 kB L1 data cache. It supports DDR and DDR2 external memory interfaces. The processor includes dual Gigabit Ethernet controllers, x2 PCI Express, x2 Serial ATA, USB 2.0, I2C, SPI, and UART interfaces. It features an integrated security engine supporting AES and DES/3DES algorithms. The component is housed in a 689-TEPBGA package and supports I/O voltages of 1.8 V, 2.5 V, and 3.3 V.

Microprocessors Feature Summary

• Integrated x2 SATA controller reduces board space and bill of materials cost by lowering chip count.
• Dual GbE controllers provide high-speed network connectivity with SGMII interface support.
• Security engine offloads encryption algorithms such as AES and DES/3DES to enhance system performance.

Microprocessors Applications

• Multifunctional printers
• IP-PBX systems
• Network routers

Microprocessors Procurement Notes

Verify current availability status as this product line may be discontinued or not recommended for new designs. Confirm exact suffix specifications against official NXP documentation to ensure compatibility with required operating temperatures and voltage levels. Check for replacement families such as T1013 or LS1012 if long-term supply assurance is required for ongoing production cycles.

Microprocessors Selection Notes

Select this component for applications requiring high integration of networking and storage interfaces within a single SoC. The e300 core provides sufficient processing power for embedded communication tasks. Ensure design compatibility with the 689-pin BGA footprint and verify that the target application can utilize the integrated PCIe and SATA controllers to minimize external component requirements.

Microprocessors Part Context

This microprocessor belongs to the MPC837xE family of PowerQUICC II Pro processors. It shares architectural similarities with the MPC8378E and MPC8379E but differs in specific interface configurations and external bus options. The family targets cost-effective, high-performance solutions for communications and consumer electronics markets using 90 nm process technology.

Microprocessors Replacement Considerations

NXP recommends using Power Architecture T1013 or Arm Architecture LS1012 and LS1023 families for new designs.