NCS20032DTBR2G

Description：IC OPAMP GP 2 CIRCUIT 8TSSOP
Series：-
Mfr：onsemi
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:2f851a27e603 Category: Instrumentation, Op Amps, Buffer Amps Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

NCS20032DTBR2G is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists onsemi. Its product description is IC OPAMP GP 2 CIRCUIT 8TSSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for NCS20032DTBR2G

Description：IC OPAMP GP 2 CIRCUIT 8TSSOP
Series：-
Mfr：onsemi
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：8V/µs
Gain Bandwidth Product：7 MHz
Current - Input Bias：1 pA
Voltage - Input Offset：500 µV
Current - Supply：275µA (x2 Channels)
Current - Output / Channel：96 mA
Voltage - Supply Span (Min)：1.7 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package：8-TSSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for NCS20032DTBR2G

NCS20032DTBR2G

Instrumentation, Op Amps, Buffer Amps Overview

The NCS20032DTBR2G is a dual-channel operational amplifier from the NCS2003 family, featuring high slew rate and low voltage operation with rail-to-rail output drive capability. It supports supply voltages from 1.7 V to 5.5 V. Key electrical parameters include a unity-gain bandwidth of 7 MHz at 5 V and a typical input offset voltage of 0.5 mV. The device operates within a temperature range of -40°C to +85°C or +125°C depending on the grade. It is housed in an 8-lead TSSOP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Rail-to-rail output drive capability for maximum dynamic range
High slew rate performance suitable for high-speed applications
Ultra-low input bias current of 1 pA typical
No output phase reversal when overdriven

Instrumentation, Op Amps, Buffer Amps Applications

Current shunt monitoring
Signal conditioning circuits
Active filter designs
Sensor buffer stages

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix DTBR2G corresponds to the TSSOP-8 package and tape/reel shipping configuration. Confirm whether the NCS prefix requires standard industrial qualification or if the NCV prefix is needed for AEC-Q100 automotive qualification and PPAP capabilities. Ensure the operating temperature range matches the specific grade required for the application environment.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for applications requiring high speed and low voltage operation. The dual-channel configuration saves board space compared to single-channel alternatives. Consider the NCS2003A variant if lower input offset voltage specifications are critical. Verify that the load conditions do not exceed the output current limits specified in the datasheet for the chosen supply voltage.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the NCS2003 family of operational amplifiers, which also includes single-channel (NCS2003) and quad-channel (NCS20034) variants. The family shares common electrical characteristics such as high slew rate and low noise. The NCS20032 specifically provides two independent amplifiers in a compact package, offering a balance between channel count and footprint efficiency.