PI6C49X0206TLIE

Clock Buffers, Drivers Overview

The PI6C49X0206TLIE is a low skew, 1-to-6 LVCMOS/LVTTL high-performance fanout buffer manufactured by Diodes Incorporated. It features a single-ended clock input compatible with LVCMOS or LVTTL levels and provides six LVCMOS/LVTTL outputs. The device supports full 3.3V, 2.5V, 1.8V, and 1.5V operation modes with a maximum output frequency of 250MHz. Key electrical parameters include a typical part-to-part skew of 250ps, propagation delay ranging from 1.2ns to 5.1ns depending on voltage, and an operating temperature range of -40°C to +85°C. It is housed in a 14-pin TSSOP package.

Clock Buffers, Drivers Feature Summary

• Six LVCMOS/LVTTL outputs with guaranteed part-to-part skew of 250ps (typical)
• Maximum output frequency of 250MHz across all supported supply voltages
• Supports 3.3V, 2.5V, 1.8V, and 1.5V core and output supply modes
• Single-ended clock input accepts LVCMOS or LVTTL logic levels

Clock Buffers, Drivers Applications

• Clock distribution networks requiring well-defined performance and repeatability
• Systems demanding low skew for synchronized signal routing
• Multi-voltage digital circuits utilizing LVCMOS or LVTTL interfaces

Clock Buffers, Drivers Procurement Notes

Verify the ordering suffix 'E' confirms Pb-free and Green status, and 'I' indicates Industrial temperature grade. Confirm the 'X' suffix denotes Tape/Reel packaging if applicable, as the base model may vary in shipping configuration. Ensure compliance with RoHS 3 and REACH requirements matches project specifications.

Clock Buffers, Drivers Selection Notes

Select this component when a 1:6 fanout ratio is required with LVCMOS/LVTTL compatibility. Consider the specific supply voltage (1.5V to 3.3V) as it directly impacts propagation delay and current consumption. Verify that the 250ps typical part-to-part skew meets system synchronization tolerances compared to other buffers in the PI6C49X series.

Clock Buffers, Drivers Part Context

This part belongs to the PI6C49X0206T family of low skew fanout buffers. It shares the same functional block diagram and pinout with variants differing primarily in packaging or suffix designations. The device is designed for applications needing reliable clock distribution without differential signaling complexity.

Clock Buffers, Drivers Replacement Considerations

Direct substitutes within the same family include PI6C49X0206TLIEX (Tape/Reel). Other PI6C49X series devices offer different output counts or interface types but require verification of pin compatibility and electrical characteristics before substitution.

Clock Buffers, Drivers FAQ

What is the typical part-to-part skew for the PI6C49X0206TLIE?

The typical part-to-part skew is 250ps, with a maximum specified value of 800ps under defined load conditions.

Does the input accept differential signals?

No, the PI6C49X0206TLIE has a single-ended clock input that accepts LVCMOS or LVTTL input levels.

What is the maximum operating frequency?

The maximum output frequency is 250MHz, regardless of whether the device is operating at 3.3V, 2.5V, 1.8V, or 1.5V.