R413813115

Attenuators Overview

The R413813115 is a connectorized attenuator manufactured by Radiall USA, Inc. It features SMA connectors and provides a fixed attenuation of 13 dB. The device operates within a frequency range of 0 Hz to 4 GHz with a maximum power rating of 2 W and an impedance of 50 Ohms. It is designed for in-line module applications and is supplied in bulk packaging.

Attenuators Feature Summary

• Fixed 13 dB attenuation value
• SMA connector interface
• 2 W power handling capability
• 50 Ohm impedance design

Attenuators Applications

• RF signal level reduction
• Test and measurement equipment
• Communication systems

Attenuators Procurement Notes

Verify the specific SMA connector type (male/female) and physical dimensions against official Radiall datasheets before integration. Confirm that the 2 W power rating aligns with system thermal requirements. Ensure the 50 Ohm impedance matches the surrounding circuit topology to prevent signal reflection issues during procurement validation.

Attenuators Selection Notes

Select this component when a fixed 13 dB loss is required within the 0-4 GHz bandwidth. Consider the SMA interface compatibility with existing PCB or cable assemblies. Evaluate the 2 W power limit against peak signal levels. Compare against other series models if higher frequency operation or different attenuation values are needed for the specific application design.

Attenuators Part Context

This part belongs to the Radiall Attenuator product line, specifically categorized as connectorized attenuators. It serves as a passive RF component used to reduce signal amplitude without distortion. The model number identifies the specific attenuation value and connector configuration within the manufacturer's standardized catalog structure.

Attenuators Replacement Considerations

Check for direct substitutes with identical 13 dB attenuation and SMA interfaces. Verify that alternative parts maintain the 4 GHz upper frequency limit and 2 W power rating. Ensure impedance matching remains at 50 Ohms to preserve signal integrity in the replacement scenario.