SL 1 053 35 S

Headers, Male Pins Overview

The Fischer Elektronik SL 1 053 35 S is a single-row male pin header connector designed for through-hole PCB mounting. It features 35 positions with a standard 2.54 mm (0.100 inch) pitch. The contacts are constructed from copper alloy and finished with tin plating to ensure reliable conductivity. The insulating body is made of black polyamide, rated UL94 V-0 for flammability. Electrical ratings include 3 A current capacity and 250 VAC voltage tolerance. The operating temperature range spans from -40°C to +163°C, supporting reflow soldering at 260°C for 10 seconds.

Headers, Male Pins Feature Summary

• Single-row male pin configuration with 35 contact positions
• Through-hole termination method for secure PCB integration
• Tin-plated copper alloy contacts for corrosion resistance
• Black polyamide insulation housing with UL94 V-0 rating

Headers, Male Pins Applications

• General-purpose electronic circuit interconnections
• Industrial control board signal routing
• Consumer electronics module assembly
• Test and measurement equipment interfaces

Headers, Male Pins Procurement Notes

Verify the specific suffix 'S' indicates the required tin-plated contact finish, as other variants may use gold or nickel. Confirm the 35-position count matches the design requirement, noting that adjacent part numbers in the SL 1 series differ only in pole count. Ensure the through-hole footprint aligns with the target PCB layout dimensions of approximately 13.9 mm length by 5.8 mm insertion depth.

Headers, Male Pins Selection Notes

Select this component when a single-row, 2.54 mm pitch header is needed for moderate current applications up to 3 A. The tin-plated finish offers cost-effectiveness compared to gold-plated alternatives while maintaining adequate performance for general signals. Consider the compact 13.9 mm form factor for space-constrained designs requiring robust mechanical retention via through-hole soldering.

Headers, Male Pins Part Context

This part belongs to the Fischer Elektronik SL 1 series of precision pin headers. The series provides various position counts ranging from 2 to higher values, all sharing the same 2.54 mm pitch and mechanical interface. The SL 1 053 designation specifically denotes the single-row variant within this standardized family of connectors.

Headers, Male Pins Replacement Considerations

Direct substitutes include other Fischer Elektronik parts within the SL 1 053 series differing only in position count, such as SL 1 053 23 S or SL 1 053 7 S. Cross-manufacturer replacements must match the 2.54 mm pitch, 35 positions, and through-hole mounting style.