SX3M100.000B20F30TNN

Oscillators Overview

The SX3M100.000B20F30TNN is a surface-mount crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a frequency of 100 MHz with a CMOS output mode. The device functions on a 3.3V supply voltage and draws a typical current of 40mA. Frequency stability is rated at ±20ppm over the operating temperature range, with an initial tolerance of ±30ppm. It supports enable and disable control signals and is housed in a compact 4-SMD, No Lead package.

Oscillators Feature Summary

• CMOS output interface for digital logic compatibility
• Enable/Disable control functionality for power management
• Surface-mount design for automated assembly

Oscillators Applications

• Standard clock signal generation
• Digital circuit timing references
• Embedded system clock sources

Oscillators Procurement Notes

Verify the manufacturer part number against official datasheets to confirm specifications such as frequency, voltage, and package type. Ensure that the ordering suffix matches the required tolerance and temperature range. Confirm that the component meets relevant environmental standards before integration into final products.

Oscillators Selection Notes

Select this oscillator when a 100 MHz standard clock source is required with CMOS outputs. Consider the 3.3V supply requirement and 40mA current consumption during power budgeting. The ±20ppm stability is suitable for general-purpose digital applications requiring precise timing synchronization.

Oscillators Part Context

This component belongs to the SX3M series of surface-mount crystal oscillators from Shenzhen SCTF Electronics. The series offers various frequencies and packages, providing standardized clock solutions for electronic designs. The specific model denotes a 100 MHz variant with defined stability and voltage parameters.

Oscillators Replacement Considerations

Check for direct pin-compatible substitutes with identical electrical characteristics. Verify that alternative components support the same 3.3V supply, CMOS output, and 100 MHz frequency. Ensure thermal and mechanical constraints are met if swapping manufacturers.