SX3M75.000B10F20TNN

Oscillators Overview

The SX3M75.000B10F20TNN is a 75 MHz standard CMOS oscillator manufactured by Shenzhen SCTF Electronics. It operates with a 3.3V supply voltage and features an enable/disable control function. The component utilizes a 4-SMD, no-lead surface-mount package with dimensions of 3.20mm x 2.50mm (0.126" L x 0.098" W). It supports a wide operating temperature range from -40°C to +85°C and maintains a frequency stability of ±10ppm.

Oscillators Feature Summary

• Integrated enable and disable functionality for power management
• CMOS output signal generation at 75 MHz
• Compact 4-SMD no-lead surface mount design

Oscillators Applications

• General clock signal generation in electronic circuits
• Embedded systems requiring precise timing references
• Consumer electronics utilizing CMOS logic interfaces

Oscillators Procurement Notes

Verify the specific datasheet version for the SX3M75.000B10F20TNN to confirm pinout configurations and electrical characteristics against your circuit requirements. Ensure that the 3.3V supply voltage aligns with your system's power rails. Check the enable/disable control logic levels to guarantee compatibility with your microcontroller or driver interface. Confirm the operating temperature range meets your environmental specifications.

Oscillators Selection Notes

Select this oscillator when a 75 MHz CMOS clock source is required with low power consumption capabilities. The enable/disable feature allows for dynamic power management in battery-operated devices. The compact 3.20mm x 2.50mm footprint is suitable for space-constrained PCB layouts. Consider the ±10ppm stability requirement for applications needing moderate frequency accuracy without the cost of higher-grade crystals.

Oscillators Part Context

This component belongs to the SX3M series of surface-mount crystal oscillators from Shenzhen SCTF Electronics. The series offers various frequencies and packages, providing standardized clock solutions for digital applications. The 'B10' suffix typically denotes the frequency stability specification, while 'F20' may indicate package or tolerance variations within the manufacturer's coding system.

Oscillators Replacement Considerations

Direct substitutes must match the 75 MHz frequency, CMOS output type, 3.3V supply voltage, and 4-SMD no-lead package dimensions. Verify that any replacement part supports the same enable/disable control mechanism and meets the -40°C to +85°C operating temperature range. Cross-reference the pinout configuration to ensure electrical compatibility.